rawstudio-2.0 ./configure errors

[macunkie]

I'v done some googling and tried to come up with a fix. No luck so far.
My ./configure out put is as follows:

checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /bin/ld
checking if the linker (/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B
checking the name lister (/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for library containing strerror... none required
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ accepts -g... (cached) yes
checking dependency style of g++... (cached) gcc3
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /bin/ld -m elf_x86_64
checking if the linker (/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... no
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for ANSI C header files... (cached) yes
checking for jpeg_destroy_decompress in -ljpeg... yes
checking jpeglib.h usability... yes
checking jpeglib.h presence... yes
checking for jpeglib.h... yes
checking for TIFFOpen in -ltiff... yes
checking tiffio.h usability... yes
checking tiffio.h presence... yes
checking for tiffio.h... yes
checking for pkg-config... /bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for PACKAGE... no
configure: error: Package requirements (gtk+-2.0 >= 2.8.0 libxml-2.0 >= 2.4 gconf-2.0 >= 2.0 lcms dbus-1 exiv2 fftw3f lensfun libcurl flickcurl sqlite3 libssl libgphoto2 x11) were not met:

No package 'libxml-2.0' found
No package 'gconf-2.0' found
No package 'lcms' found
No package 'dbus-1' found
No package 'exiv2' found
No package 'fftw3f' found
No package 'lensfun' found
No package 'libcurl' found
No package 'flickcurl' found
No package 'sqlite3' found
No package 'libssl' found
No package 'libgphoto2' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables PACKAGE_CFLAGS
and PACKAGE_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.

Though I've looked at the man pages for PCG_CONFIG_PATH, as a linux newbie I'm still having problems how to set my ./configure --options to find the above mentioned packages.. I went through each "NO pakage and "yum installed what I could. Some where not found. I also installed "gtk2-devel".

So any help here would be greatly apprciated !
Running Fedora 17 on a MacBook Pro i7.

Thank you,

Samuel.

[PabloTwo]

configure is searching for the "development" header files for those programs.

yum install libxml2-devel libcurl-devel lcms-devel libxml-devel dbus-devel flickcurl-devel lensfun-devel sqlite-devel GConf2-devel openssl-devel libgphoto2-devel exiv2-devel

---------- Post added at 06:51 PM ---------- Previous post was at 06:46 PM ----------

rawstudio-2 is available in the F16 repos. Have you tried:

yum install rawstudio

Available Packages
Name        : rawstudio
Arch        : x86_64
Version     : 2.0
Release     : 1.fc16
Size        : 678 k
Repo        : fedora
Summary     : Read, manipulate and convert digital camera raw images
URL         : http://rawstudio.org
License     : GPLv2+
Description : Rawstudio is a highly specialized application for processing RAW images
            : from digital cameras. It is not a fully featured image editing application.
            : 
            : The RAW format is often recommended to get the best quality out of digital
            : camera images.  The format is specific to cameras and cannot be read by most
            : image editing applications.
            : 
            : Rawstudio makes it possible to read and manipulate RAW images, experiment
            : with the controls to see how they affect the image, and finally export into
            : JPEG, PNG or TIF format images from most digital cameras.

[bob]

It's also available for F17. Just checked.

[macunkie]

Originally Posted by PabloTwo

configure is searching for the "development" header files for those programs.

yum install libxml2-devel libcurl-devel lcms-devel libxml-devel dbus-devel flickcurl-devel lensfun-devel sqlite-devel GConf2-devel openssl-devel libgphoto2-devel exiv2-devel

---------- Post added at 06:51 PM ---------- Previous post was at 06:46 PM ----------

rawstudio-2 is available in the F16 repos. Have you tried:

yum install rawstudio

Available Packages
Name        : rawstudio
Arch        : x86_64
Version     : 2.0
Release     : 1.fc16
Size        : 678 k
Repo        : fedora
Summary     : Read, manipulate and convert digital camera raw images
URL         : http://rawstudio.org
License     : GPLv2+
Description : Rawstudio is a highly specialized application for processing RAW images
            : from digital cameras. It is not a fully featured image editing application.
            : 
            : The RAW format is often recommended to get the best quality out of digital
            : camera images.  The format is specific to cameras and cannot be read by most
            : image editing applications.
            : 
            : Rawstudio makes it possible to read and manipulate RAW images, experiment
            : with the controls to see how they affect the image, and finally export into
            : JPEG, PNG or TIF format images from most digital cameras.

Ummm. Ya. The yum install went flawless. Thank you !