cadsoft eagle

[g8jvm]

Hi
Trying to install Cadsoft eagle pcb design app

and getting :-
error while loading shared libraries: libssl.so.0.9.8: cannot open shared object file: No such file or directory

[root@localhost Downloads]# yum provides */libssl
Loaded plugins: presto, refresh-packagekit
No Matches found
I also tried
[root@localhost Downloads]# yum provides */libssl.so.0.9.8
Loaded plugins: presto, refresh-packagekit
No Matches found


I found this on the Cadsoft forum:-

On 06/15/2010 11:15 PM, Weston Schmidt wrote:
> I just tried to install the 5.10.0 release of EAGLE on a Fedora 13 system
> & got the following error:
> (as root) ./eagle-lin-5.10.0.run
> /tmp/eagle-setup.21333/eagle-5.10.0/bin/eagle: error while loading shared
> libraries: libssl.so.0.9.8: cannot open shared object file: No such file
> or directory
>
> The following libraries are present:
> libssh2.so.1 libssl3.so libssl.so.1.0.0
> libssh2.so.1.0.1 libssl.so.10
>
> Any ideas?
>
> Thanks,
> Wes

I am running F13 also, and had the same problem.

I copied these files from acroread (/opt/Adobe/Reader9/Reader/intellinux/lib)
to my /usr/lib directory. I'm sure you can find them elsewhere, but I already
had acroread, so that was convenient for me.

You will actually need to add two files to /usr/lib:

libssl.so.0.9.8
libcrypto.so.0.9.8

Steve
Report message to a moderator

- Re: Fedora 13 + EAGLE 5.10.0 Issue [message #126962 is a reply to message #126952] Wed, 16 June 2010 12:55 Go to previous messageGo to next message
Weston Schmidt is currently offline Weston Schmidt
Messages: 5
Registered: April 2007
Junior Member

Steve,

Thanks for the great suggestion - that worked for me as well.

--Wes
Report message to a moderator

- Re: Fedora 13 + EAGLE 5.10.0 Issue [message #127920 is a reply to message #126947] Thu, 15 July 2010 04:02 Go to previous message
Klaus Schmidinger is currently offline Klaus Schmidinger
Messages: 1177
Registered: November 2008
Senior Member

On 06/16/10 05:15, Weston Schmidt wrote:
> I just tried to install the 5.10.0 release of EAGLE on a Fedora 13 system
> & got the following error:
> (as root) ./eagle-lin-5.10.0.run
> /tmp/eagle-setup.21333/eagle-5.10.0/bin/eagle: error while loading shared
> libraries: libssl.so.0.9.8: cannot open shared object file: No such file
> or directory
>
> The following libraries are present:
> libssh2.so.1 libssl3.so libssl.so.1.0.0
> libssh2.so.1.0.1 libssl.so.10

We will link in the necessary libraries statically in the next version.

Klaus Schmidinger
--
__________________________________________________ _____________

Klaus Schmidinger Phone: +49-8635-6989-10
CadSoft Computer GmbH Fax: +49-8635-6989-40
Pleidolfweg 15 Email: kls@cadsoft.de
D-84568 Pleiskirchen, Germany URL: www.cadsoft.de


Here's the question
Is there any way I can link the libs without resorting to loading Adobe Reader ?
version 11 of Cadsoft Eagle is not out yet.

Its an app I use and need.

TIA
Richard

[Hlingler]

Is there any way I can link the libs without resorting to loading Adobe Reader ?

You mean without installing Acrobat Reader?

I don't see why you cannot grab the libs somewhere and dump them in the correct location (preferably the cadsoft eagle folder, or /usr/lib/). You may end up downloading and unpacking the libs from some old RPMs - grab from Koji.

V

[g8jvm]

Thanks Hlinger,
I was trying to avoid a dependency on one package to another.
I have eagle installed now, by installing Acrobat reader and putting sym links in, I'd much rather link to existing libs which wont get cleaned or orphaned on an update.
Thanks for the info on Koji.

Anyway now I have Eagle installed I have the problem of printing. up to about 18 months ago in the print menu I could choose the print resolution. What I use is 2880 x 2880.

Now its been changed to, manual control, text,graphics, mixed text and graphics, photo and line art.

This is exactly the same as the printer properties, and none of the options are at very high resolution which I need for printing on transparencies. This is not a Fedora problem , its all distros.

I think its a gutenprint change, but had no luck there either.
The printer is an Epson R285 ( photo-stylus)

[stevea]

Again a bad thread title. Should be "Need libssl-0.9.8" Maybe read the forum guidelines.
http://www.fedoraforum.org/?view=guide

You want libssl-0.9.8, but that's an older package. fedeora has open ssl version 1.x now. If ou install from an older RPM (like the F11 rpm file). You can force install it, but it mess up the existing package (other binaries, manual pages, etc).

Try compiling from souce and installing under /usr/locall or similar.

sudo yum -y group install "Development Tools" "Development Libraries"
wget http://www.openssl.org/source/openssl-0.9.8o.tar.gz -O - | tar -xzv
cd openssl*
./config shared -fPIC --openssldir=/usr/local
make
sudo make install


Then add /usr/local/lib to the ld.conf list with ....
sudo bash
echo "/usr/local/lib" > /etc//etc/ld.so.conf.d/old-ossl.conf
exit


Use "ldd" in the binary to verify that the dynamic link is good.

[librae8226]

Hi g8jvm,
I find there's a simple solution.

U just need to do these:

cd /usr/lib
sudo ln -s libssl.so.1.0.0a libssl.so.0.9.8
sudo ln -s libcrypto.so.1.0.0a libcrypto.so.0.9.8

That's all. Hope it's helpful.

[bobtpc]

For a 64-bit install, do the same in /usr/lib64.