Hi folks,
I've got a troublesome problem that has been driving me nuts for a few weeks now...
I recently ran the upgrade from Fedora 10 to version 11 via the online update. Since then, everything has worked very nicely.
However, I can't get the system to recognize my USB memory cards.. I have a small card reader that has worked perfectly with earlier versions of Fedora (5, 6 and 9) I'm sure of. And this also works fine on my Windows boxes.
When I plug the card reader into the USB port, and then insert a memory card, the status light changes on the card reader to show that it detects media being inserted. However, I am not able to get the card to mount.
Usually, when I insert a USB drive, I receive a pop-up in KDE asking what operations I'd like to perform. Sorta like when you insert them into Windows. I just navigate to the folder and copy the items I want to use.
Typical USB flash drives and external hard drives work beautifully with this computer. However, the flash memory cards for my digital cameras are not doing anything.
I'm pasting the output of the fdisk -l command in the event it may help correct this problem...
The first one is if I insert an XD card out of one of my Fuji cameras... I can manually mount this volume and download the photos... However, the second example is from one of my Canons and uses the SDHC memory cards, and nothing appears in the list...
Disk /dev/sda: 750.1 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000731dd
Device Boot Start End Blocks Id System
/dev/sda1 * 1 25 200781 83 Linux
/dev/sda2 26 91201 732371220 8e Linux LVM
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Disk /dev/sdb doesn't contain a valid partition table
Disk /dev/dm-0: 743.6 GB, 743666876416 bytes
255 heads, 63 sectors/track, 90412 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Disk /dev/dm-0 doesn't contain a valid partition table
Disk /dev/dm-1: 6241 MB, 6241124352 bytes
255 heads, 63 sectors/track, 758 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x30307800
Disk /dev/dm-1 doesn't contain a valid partition table
Disk /dev/sde: 2097 MB, 2097152000 bytes
66 heads, 63 sectors/track, 985 cylinders
Units = cylinders of 4158 * 512 = 2128896 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sde1 * 1 985 2047746+ 6 FAT16
Partition 1 has different physical/logical endings:
phys=(984, 65, 63) logical=(984, 65, 49)
[root@localhost ~]#
And here is the example of the SDHC card from my Canon. Unfortunately, this has become the camera I use most often and is more important to be able to retrieve photographs...
Disk /dev/sda: 750.1 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000731dd
Device Boot Start End Blocks Id System
/dev/sda1 * 1 25 200781 83 Linux
/dev/sda2 26 91201 732371220 8e Linux LVM
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Disk /dev/sdb doesn't contain a valid partition table
Disk /dev/dm-0: 743.6 GB, 743666876416 bytes
255 heads, 63 sectors/track, 90412 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Disk /dev/dm-0 doesn't contain a valid partition table
Disk /dev/dm-1: 6241 MB, 6241124352 bytes
255 heads, 63 sectors/track, 758 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x30307800
Disk /dev/dm-1 doesn't contain a valid partition table
Please feel free to toss out any ideas. Thanks.
Linear Mode
