Hello,
I'm new with fedora, and it works almost super.
But my network crashes after 6 minutes. I don't now why, and i couldnt find any answers on the internet. Maybe enybody here can help me
First my computer configuration.
X ---------------X--------------X
Modem Fedora linux Router
Internet komt binnen via de modem, daar zit rechtstreeks mijn linux aan gesloten met 1 netwerk kaart (eth0). Er zit nog een netwerk kaart in vandaar uit gaat de lijn naar de router (eth1), en daar zitten mijn computers aan.
Mijn linux fungeert dus als een DHCP server.
My intern ip adressen = 192.168.55.***
Mijn Ip-adres to the internet is always the same.
After boot everything goes alright, but after 60 minutes my network crashes, and don't recognise my networkcard (eth0).
Wie kan mij vertellen wat de juiste instellingen zijn voor de netwerk kaarten?
/etc/sysconfig/network-scripts/ifcfg-eth0:
Quote:
# Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller
DEVICE=eth0
#HWADDR=00:24:21:3D:FB:FE
ONBOOT=yes
BOOTPROTO=dhcp
#TYPE=Ethernet
#DEFROUTE=yes
#IPV4_FAILURE_FATAL=yes
#IPV6INIT=no
#NAME="System eth0"
#UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03
#NM_CONTROLLED=yes
#USERCTL=no
#PEERDNS=yes
#PEERROUTES=yes
|
/etc/sysconfig/network-scripts/ifcfg-eth1:
Quote:
# Linksys Gigabit Network Adapter
DEVICE=eth1
HWADDR=00:12:17:54 E:2A
ONBOOT=yes
TYPE=Ethernet
BOOTPROTO=none
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth1"
UUID=9c92fad9-6ecb-3e6c-eb4d-8a47c6f50c04
IPADDR=192.168.55.102
NETMASK=255.255.255.0
NM_CONTROLLED=yes
USERCTL=no
PREFIX=24
|
Bij # route -n krijg ik deze melding:
Quote:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.55.0 0.0.0.0 255.255.255.0 U 1 0 0 eth1
85.113.252.0 0.0.0.0 255.255.252.0 U 1 0 0 eth0
0.0.0.0 85.113.252.1 0.0.0.0 UG 0 0 0 eth0
|
Wie kan mij hier mee verder helpen? ik kom er niet uit, en ik moet om de 6 min. alles opnieuw opstarten.
Oja, mijn dhcpd.conf bestand :
Quote:
# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#
# option definitions common to all supported networks...
option domain-name "marco-h.nl";
option domain-name-servers 213.197.28.3,213.197.30.28;
default-lease-time 4000;
max-lease-time 8000;
# Use this to enble / disable dynamic dns updates globally.
#ddns-update-style none;
# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
authoritative;
# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;
# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.
#subnet 10.152.187.0 netmask 255.255.255.0 {
#}
# This is a very basic subnet declaration.
#subnet 10.254.239.0 netmask 255.255.255.224 {
# range 10.254.239.10 10.254.239.20;
# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
#}
# This declaration allows BOOTP clients to get dynamic addresses,
# which we don't really recommend.
#subnet 10.254.239.32 netmask 255.255.255.224 {
# range dynamic-bootp 10.254.239.40 10.254.239.60;
# option broadcast-address 10.254.239.31;
# option routers rtr-239-32-1.example.org;
#}
# A slightly different configuration for an internal subnet.
#subnet 10.5.5.0 netmask 255.255.255.224 {
# range 10.5.5.26 10.5.5.30;
# option domain-name-servers ns1.internal.example.org;
# option domain-name "internal.example.org";
# option routers 10.5.5.1;
# option broadcast-address 10.5.5.31;
# default-lease-time 600;
# max-lease-time 7200;
#}
# Hosts which require special configuration options can be listed in
# host statements. If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.
#host passacaglia {
# hardware ethernet 0:0:c0:5d:bd:95;
# filename "vmunix.passacaglia";
# server-name "toccata.fugue.com";
#}
# Fixed IP addresses can also be specified for hosts. These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP. Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
# hardware ethernet 08:00:07:26:c0:a5;
# fixed-address fantasia.fugue.com;
#}
# You can declare a class of clients and then do address allocation
# based on that. The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.
#class "foo" {
# match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
#}
#shared-network 224-29 {
# subnet 10.17.224.0 netmask 255.255.255.0 {
# option routers rtr-224.example.org;
# }
# subnet 10.0.29.0 netmask 255.255.255.0 {
# option routers rtr-29.example.org;
# }
# pool {
# allow members of "foo";
# range 10.17.224.10 10.17.224.250;
# }
# pool {
# deny members of "foo";
# range 10.0.29.10 10.0.29.230;
# }
#}
next-server 192.168.55.102;
subnet 192.168.55.0 netmask 255.255.255.0 {
option routers 192.168.55.102;
range 192.168.55.105 192.168.55.115;
next-server 192.168.55.102;
}
|
Hybrid Mode
