FedoraForum.org - Fedora Support Forums and Community
Results 1 to 6 of 6
  1. #1
    Join Date
    May 2010
    Posts
    2
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    RT2860 does not connect to WPA/WPA2 network (F13)

    Hi everyone,

    I have a problem with my RT2860 in my Eee PC 901 running F13. It connected fine in F12 when I installed the akmod-rt2860 driver. I enter my WPA key, then it tries to connect, but the WPA key screen appears again saying that I may have typed in my WPA key incorrectly. However, I checked and it is the right WPA key.

    Can anyone help
    jackyboy633

  2. #2
    Join Date
    Dec 2008
    Posts
    71
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: RT2860 does not connect to WPA/WPA2 network (F13)

    Jack:

    In F13 the rt2860 driver that is built in is broken.

    There is a working one in the rpmfusion repository. here's how I set mine up to work (on my 901):

    log in to a terminal as root
    using your favorite text editor open /etc/modprobe.d/blacklist and add the 6 lines below to the end of it:

    # blacklist builtin/kernel ralink 28xx modules 'cause they're broken
    blacklist rt2x00lib
    blacklist rt2800pci
    blacklist rt2800lib
    blacklist rt2x00usb
    blacklist rt2x00pci

    then reboot

    for the next step you'll need to connect to a wired network, temporarily, so you can download the working wireless package. Once you're connected via a wired network, browse to http://rpmfusion.org/Configuration and follow the instructions under the heading "Graphical Setup via Firefox web browser" for setting up both the "free" and "non-free" repositories. (my experience on my 901 is that it's kind of slow,... it'll ask you for some confirmation for a couple of additional steps for each of the repositories, so I'd wait a minute or so after clicking to configure each repository just to make sure it's done.)

    Once that's all done, you can then install the working rt2860 drivers. In the little text window at the top left of "add/remove software" (which you can find in F13 on the SYSTEM / ADMINISTRATION menu) enter "rt2860" without the quotes, click the "find" button and give it a moment.

    It should find several packages. Check the checkbox next to the one described as "Metapackage which tracks in rt2860 kernel module for newest kernel". If there are more than one by that name, pick the one with the highest version number. (on my eeepc that is package "kmod-rt2860-2.3.0.0-1.fc13.2 (i686)".

    click the "Apply" button at the lower right and wait for it to finish. You may need to enter your root password (it'll ask for authentication) and it should also display a list of other packages it needs to install to complete the request. Allow it to go ahead and install them.

    Once it's done you should be able to configure your wireless (don't recall ifyou need to reboot after the installation or not, but it won't hurt anything.)

    Good luck!

  3. #3
    Join Date
    Oct 2006
    Location
    新加坡
    Posts
    1,010
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Re: RT2860 does not connect to WPA/WPA2 network (F13)

    I had a similar problem with my wireless USB adapter using rt2870 chipset. But I think the root cause of our problem in F13 is the same. After installing akmod-rt2870 driver from rpmfusion, the wlan link could not be established. Further poking around with lsmod and dmesg showed my system was using the "broken" driver shipped together with the kernel package instead of the one provided by rpmfusion. To cut the story short, my solution is almost the same as fredex above. I have a file called "blacklist-rt2800usb.conf" in my old F12 system which blacklist the rt2800usb. This file was created by rpmfusion in one of their earlier version of rt2870 package (I suppose because they seem not to include this file anymore -- could be a bug in their recent package IMO). Anyway, I have attached the file here. Copy it into the "/etc/modprobe.d" folder solves the problem.
    Attached Files Attached Files
    Leave no window unbroken ♪ (^。^) 

  4. #4
    Join Date
    Oct 2006
    Location
    新加坡
    Posts
    1,010
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Re: RT2860 does not connect to WPA/WPA2 network (F13)

    I have logged the bug to RPMFusion team and the fix will be available soon.

    http://bugzilla.rpmfusion.org/show_bug.cgi?id=1249

    Hope they fix the rt2860 package as well.
    Leave no window unbroken ♪ (^。^) 

  5. #5
    leigh123linux Guest

    Re: RT2860 does not connect to WPA/WPA2 network (F13)

    Quote Originally Posted by weitjong
    I have logged the bug to RPMFusion team and the fix will be available soon.

    http://bugzilla.rpmfusion.org/show_bug.cgi?id=1249

    Hope they fix the rt2860 package as well.

    They fixed rt3070 as well


    Code:
    Downloading Packages:
    Setting up and reading Presto delta metadata
    Processing delta metadata
    Package(s) data still to download: 256 k
    (1/4): buildsys-build-rpmfusion-13-3.x86_64.rpm          |  14 kB     00:00     
    (2/4): buildsys-build-rpmfusion-kerneldevpkgs-current-13 |  12 kB     00:00     
    (3/4): kmod-rt3070-2.6.33.5-112.fc13.x86_64-2.1.1.0-3.fc | 213 kB     00:00     
    (4/4): rt3070-2.1.1.0-3.fc13.1.noarch.rpm                |  17 kB     00:00     
    --------------------------------------------------------------------------------
    Total                                           130 kB/s | 256 kB     00:01     
    Running rpm_check_debug
    Running Transaction Test
    Transaction Test Succeeded
    Running Transaction
    Code:
    [leigh@localhost ~]$ rpm -ql rt3070
    /etc/Wireless
    /etc/Wireless/RT3070STA
    /etc/Wireless/RT3070STA/RT3070STA.dat
    /etc/Wireless/RT3070STA/RT3070STACard.dat
    /etc/modprobe.d/blacklist-rt2800usb.conf
    /usr/share/doc/rt3070-2.1.1.0
    /usr/share/doc/rt3070-2.1.1.0/README_STA_usb
    /usr/share/doc/rt3070-2.1.1.0/ReleaseNote-RT3070.txt
    /usr/share/doc/rt3070-2.1.1.0/iwpriv_usage.txt
    /usr/share/doc/rt3070-2.1.1.0/sta_ate_iwpriv_usage.txt
    /usr/share/doc/rt3070-2.1.1.0/suspend.sh

  6. #6
    Join Date
    Feb 2010
    Posts
    3
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: RT2860 does not connect to WPA/WPA2 network (F13)

    Hey fredex, just want to say thanks! This is exactly what I needed. My eee 1000H thanks you!

Similar Threads

  1. Replies: 1
    Last Post: 2nd February 2012, 03:43 PM
  2. Unable to connect to WPA2 network in Fedora 11 Alpha
    By Overlord Laharl in forum Servers & Networking
    Replies: 3
    Last Post: 9th May 2009, 07:25 PM
  3. Replies: 5
    Last Post: 14th April 2009, 12:37 AM
  4. Replies: 0
    Last Post: 5th May 2008, 01:39 AM
  5. Replies: 4
    Last Post: 27th January 2008, 02:58 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •