Sorry I posted the log on the fedora paste thingie.... Do I need to do it again?
After pasting the info you are supposed to post the page link here.
Thank God I am not an Ape descendant...
Leigh, could you please help. I have tried doing this on my own, but no luck.
I installed the Nvidia drivers as you stated in your first post, but just a couple of weeks ago I noticed nothing 3D works.
I have been using Fedora 11 64 bit since the second week it came out, but I had not tried anything 3d
No 3d games will load and when i try to launch blender I get this:
I went to the Blender forums and one thread says that the drivers are not being recognized. I checked if it was interfering with the nouveau drivers, but I don't think it is.[timmywear@timmyhost ~]$ blender
Compiled with Python version 2.6.
Checking for installed Python... got it!
ERROR: Unable to open Blender window
[timmywear@timmyhost ~]$ lsmod | grep nouveau
[timmywear@timmyhost ~]$ rpm -qa |grep nvidia
xorg-x11-drv-nvidia-185.18.14-3.fc11.x86_64
akmod-nvidia-185.18.14-1.fc11.x86_64
kmod-nvidia-2.6.29.5-191.fc11.x86_64-185.18.14-1.fc11.1.x86_64
kmod-nvidia-185.18.14-1.fc11.2.x86_64
xorg-x11-drv-nvidia-libs-185.18.14-3.fc11.x86_64
kmod-nvidia-2.6.29.6-213.fc11.x86_64-185.18.14-1.fc11.2.x86_64
xorg-x11-drv-nvidia-libs-185.18.14-3.fc11.i586[timmywear@timmyhost ~]$ uname -r
2.6.29.6-213.fc11.x86_64Here is my xorg.conf[timmywear@timmyhost ~]$ rpm -qa | grep kernel
kernel-2.6.29.6-213.fc11.x86_64
kernel-devel-2.6.29.5-191.fc11.x86_64
kerneloops-0.12-5.fc11.x86_64
kernel-2.6.29.5-191.fc11.x86_64
kernel-firmware-2.6.29.6-213.fc11.noarch
kernel-devel-2.6.29.6-213.fc11.x86_64
kernel-2.6.29.4-167.fc11.x86_64
kernel-headers-2.6.29.6-213.fc11.x86_64
Thanks for your time.# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder62) Wed May 27 01:59:40 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
FontPath "/usr/share/fonts/default/Type1"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
# Removed Option "Xinerama" "0"
# Removed Option "Xinerama" "1"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from data in "/etc/sysconfig/keyboard"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "us"
Option "XkbModel" "pc105"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Sony SDM-HS95P"
HorizSync 28.0 - 81.0
VertRefresh 48.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "HP vs17"
HorizSync 30.0 - 83.0
VertRefresh 50.0 - 76.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9800 GT"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9800 GT"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
# Removed Option "TwinView" "0"
# Removed Option "metamodes" "CRT-0: nvidia-auto-select +0+0"
# Removed Option "TwinViewXineramaInfoOrder" "CRT-0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "CRT-1"
Option "metamodes" "CRT-0: nvidia-auto-select +1280+0, CRT-1: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "CRT-1: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
edit: My card is an Nvidia 9800GT.
edit:[timmywear@timmyhost ~]$ glxinfo|grep render
Error: glXCreateContext failed
Last edited by JohnnyLinux; 4th August 2009 at 07:00 AM. Reason: Add more info
This looks like a problem to me (see Post #1):I.E.: add the missing lines highlighted in RED. Re-start of X required. Try this before trying to remove packages or other tricks....For 64 bitCode:Section "Files" ModulePath "/usr/lib64/xorg/modules/extensions/nvidia" ModulePath "/usr/lib64/xorg/modules/drivers" ModulePath "/usr/lib64/xorg/modules" EndSection
V
Last edited by Hlingler; 4th August 2009 at 07:07 AM.
I have never really configure a xorg.conf, do I just add it at the very bottom? OR add it to this?:
Thanks.Section "Files"
FontPath "/usr/share/fonts/default/Type1"
EndSection
No: add the lines in RED to the existing 'Section "Files" ' and leave the existing line 'FontPath ...' alone. Final result should look like so:Re-start of X required. Try this before trying to remove packages or other tricks....Code:Section "Files" FontPath "/usr/share/fonts/default/Type1" ModulePath "/usr/lib64/xorg/modules/extensions/nvidia" ModulePath "/usr/lib64/xorg/modules/drivers" ModulePath "/usr/lib64/xorg/modules" EndSection
V
Thanks. I will do this, reboot and see if it worked. be back in 5 min.
Thanks.
Hm. 02:30 here and he's not back yet. This is either very good, or very bad. Isn't the suspense exciting?
V
Thanks a lot Hlingler!!!
3D apps now run. If only I had paid better attention from the beginning. Now the only issue is that, since I have 2 monitors the main monitor (right one, where I launch the 3d game from) gets cut off the screen all the way to the right while in full screen. I have not tried windowed mode for the game, but I'm just stoked I can run 3d apps now.
EDIT: Blender seems to work fine though
All is now well: peace, tranquility, and 3D rendering reign once more in Timmy's world....3D apps now run.Funny, I was thinking much the same....If only I had paid better attention from the beginning.(j.k.)
Multiple-monitor set-ups is definitely not my bag. Looks like you'll have to wait on a real guru for help on that. In the meantime, enjoy some 3D eye-candy!Now the only issue is that, since I have 2 monitors the main monitor (right one, where I launch the 3d game from) gets cut off the screen all the way to the right while in full screen. I have not tried windowed mode for the game, but I'm just stoked I can run 3d apps now.
V
Crap I am an idiot... I will do that tonight. Thanks.
Thank God I am not an Ape descendant...
Thanks2Hlinger!
The same problems with 3D-things on a 32bit system and having tried almost everything I could think of (except reinstalling the whole system), but nothing seemed to work... Your solution was the key! The only thing I had to do was to change lib64 to lib (quite obvious...).