PDA

View Full Version : RAID 1 Installation


il_boss
24th November 2005, 07:59 AM
Hi to all,
I'm installaing FC4 on a 2 HD server and tring, with Disk Druid, to using the RAID Software Partition
I did this:
- Partitioning the 1st HD in 4 RAID Software Part;
- Duplicate the 1st on the 2nd;
- link in Raid1 the two HD partiotion.
(see the partition situation on the bottom)
Before go ahead with the intallation, I have to do something else with Disk druid, to configurate correctly the Raid software?
I'm sorry but I'm new about linux and I'm learnig.
Thank's for the help
Boss


[RAID]
/dev/md3 /home 120000
/dev/md0 /boot 102
/dev/md1 swap 1024
/dev/md2 / 30000

[Hard Disks]
/dev/sda
/dev/sda1 /dev/md0 RAID software 102
/dev/sda2 /dev/md2 RAID software 30000
/dev/sda3 /dev/md1 RAID software 1024
/dev/sda4 ESTESA 120000
/dev/sda5 /dev/md3 RAID software 120000

/dev/sdb
/dev/sdb1 /dev/md0 RAID software 102
/dev/sdb2 /dev/md2 RAID software 30000
/dev/sdb3 /dev/md1 RAID software 1024
/dev/sdb4 ESTESA 120000
/dev/sdb5 /dev/md3 RAID software 120000