SMC 8416 ISA card (EtherEz)

[EldestGeech]

Installed FC4 on an old 200Mhz Compaq Presario 3060 for use as a firewall. Has only two slots available, one PCI and one ISA, hence installed one PCI Linksys card, which the system recognizes well, and one SMC 8416 ISA card, which is going completely unrecognized. It's as if it didn't exist. There are plenty of ways to configure the SMC card (outside of Linux) -- I've tried making it PnP, and making it not PnP, but none of my efforts has made any difference to its invisibility to the system. I do not have the option of installing two PCI cards on this particular machine, or I would do that. Any hints would be appreciated.

[imdeemvp]

Some hardware are consider legacy in fedora and they dont have support such as ISA cards. I also use a SMC card but it is pci.
[imdeemvp@myFC4 ~]$ /sbin/lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 81)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:04.0 Modem: PCTel Inc HSP MicroModem 56 (rev 02)
00:05.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10)
00:14.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
00:14.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10)
00:14.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10)
00:14.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10)
00:14.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
00:14.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 20)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2)
[imdeemvp@myFC4 ~]$