Adaptec Ultra320 HostRAID + FC4

[UThomas]

Hello everbody,

i´m trying to install FC4 on a Sun Fire V65x Server. There´s a built-in Adaptec 7902 HostRAID Controller. The standard aic79xx driver shipped with FC4 don´t support the HostRAID feature of the controller.
Can someone tell me how I can build a driver disk supported by the FC4 installation ??
or is there a HostRAID supported driver availible ?

best regards
Ulrich H. Thomas

* Ulrich H. Thomas | Leutnant der InstTr, EIT 04
* Werner-Heisenberg-Weg 107 App: 232
* D-85579 Neubiberg
* Telefon: 0700/uhthomas ; 0700/84846627 | AFu-Call: DG8OBZ
* mail: ulrich.thomas@unibw-muenchen.de | ICQ: 3188985
* home: <http://ulrich.thomas-alfeld.de/>

[fsck]

I'm pretty sure FC isn't supported on the v65z, but RHEL 2.1 and RedHat 7.2 - 9 are, you can pick up the adaptec drivers from http://www.sun.com/servers/entry/v60x/downloads.html which might help.

C.

[UThomas]

I'm pretty sure FC isn't supported on the v65z, but RHEL 2.1 and RedHat 7.2 - 9 are, you can pick up the adaptec drivers from http://www.sun.com/servers/entry/v60x/downloads.html which might help.

C.

Hi!
I´ve running Fedora Core 4 on the V65x but without the HostRAID support of the Adaptec controller. I have to use the free FC4 Linux. I´ve tried to use some of this drive diskettes but they aren´t working.

best regards
Ulrich H. Thomas

--
* Ulrich H. Thomas
* Werner-Heisenberg-Weg 107 App: 232
* D-85579 Neubiberg
* Telefon: 0700/uhthomas ; 0700/84846627 | AFu-Call: DG8OBZ
* mail: ulrich.thomas@unibw-muenchen.de | ICQ: 3188985
* home: http://ulrich.thomas-alfeld.de/

[fsck]

Ulrich,
Having asked around, I'm told that HostRAID drivers are not available for Linux due to legal reasons. The only drivers available were released for commercial RedHat 8, and are hard to find.
The only Adaptec cards with Linux HostRAID drivers available appear to be the 29320 and 39320.

[UThomas]

I think in the V65x is a 39320 Adaptec on the Intel Mainboard. It´s an dual SCSI Ultra320 HostRAID Controller.
Okay, i googled around the internet and found the driver images from Adaptec for several RedHat version... Isn´t it possible to extract the driver from this driver disk and built a new one with this compiled driver included that´s recognized by fedore core 4 install ?

best regards
Ulrich H. Thomas

[fsck]

Actually I'm not sure it is (http://www.sun.com/servers/entry/v65x/specs.xml#Mass%20Storage%20and%20Media-4). In any case, given that HostRAID is just software raid anyway (using special adaptec code) you might as well just use the volume manager in FC4.
As far as I know the source for the U320 HostRAID stuff is not available.

C.

[UThomas]

okay so far. I know this too but I hope that anyone else have an idea to run this stupid pseudo-hardware-raid-controller :-) or is there a how-to or manual to build a driver disk ?

best regards
Ulrich H. Thomas

[fsck]

Sorry, if you are not going to use the hostraid functionality, and use software raid, then what driver do you need? If you are having trouble seeing the disks, try turning off hostraid in the adaptec bios.

[space-cadet]

okay so far. I know this too but I hope that anyone else have an idea to run this stupid pseudo-hardware-raid-controller :-) or is there a how-to or manual to build a driver disk ?

best regards
Ulrich H. Thomas
My friend and I have the same problem!
I think there are no open source driver for that RAID controller !closed hardware:(!. We made driver diskette from IBM ServRAID cd and tried to use it with fedora. Then we examined scripts on diskette and found out that provided drivers are for 2.4 kernel only.

Supported Red Hat linux systems are: Red Hat 9, RHEL ending with version 3. Version 4 is not mentioned in IBM docs and we think it is not supported 'couse it uses 2.6 kernel.

Maybe you could try CentOS 3 with driver provided by IBM on ServRAID cd or use software RAID!

[eof]

okay so far. I know this too but I hope that anyone else have an idea to run this stupid pseudo-hardware-raid-controller :-) or is there a how-to or manual to build a driver disk ?

best regards
Ulrich H. Thomas

Uli,

if this machine is not exclusively for playing but (as I presume) for real server use:
- Lets assume you got the HostRaid running. Do you have some software at hand to manage the array once a disk fails or for simply managing it? If the answer were no (which meant you needed to boot into the Adaptec BIOS for that), Software RAID, combined with LVM2 would be absolutely preferrable from my point of view.

Just my two (Euro)Cents
Steffen

[Almuric]

Just use linux MD for raid, it is better than the software adaptec would provide, works quicker, better, extensively tested, etc etc


Use LVM for the flexibility , eg adding a new set of mirrorred drives and spanning the filesystem across two sets of two drives,but LVM is not required for raid

[JohnVV]

Almuric PLEASE Do not drag up 3 year old posts and answer them !!

[glennzo]

Thread closed.