[sorry for posting again]Problem installing st330 (usb-controller?)

[Upsilon]

OS : Fedora Core 3

i followed instruction from : http://speedtouch.sf.net/

the installation was okay but it just wouldnt connect...
therefore i ran a check with the speedtouch-doctor


Support for USB is OK
Preliminary USB File System is OK
I found no USB controller


how can i install a driver (is there such thing?) for USB controller?

My mother board is ABIT IS7-E with built in USB

i found these host controller information thru windows device manager...


Intel 82801EB USB Universal host controller - 24D2
Intel 82801EB USB Universal host controller - 24D4
Intel 82801EB USB Universal host controller - 24D7
Intel 82801EB USB Universal host controller - 24DE
Intel 82801EB USB2 Enchanced host controller - 24DD

[jamdusr]

I don't think that your usb system is the problem-it's the modems ability to interface.
You might want to go here: http://start.at/modem and check out the section on usb modems.

Quote from the above link: 4. Are there any external Winmodems? Am I always safe getting an external modem?
Standard serial port (RS-232) external modems are usually fine, no matter what make or model.
Many USB external modems are winmodems and should be avoided. If you are interested in the status of USB support in Linux, please follow the link to the Linux-USB uusbd development page"

[Upsilon]

I don't think that your usb system is the problem-it's the modems ability to interface.
You might want to go here: http://start.at/modem and check out the section on usb modems.

Quote from the above link: 4. Are there any external Winmodems? Am I always safe getting an external modem?
Standard serial port (RS-232) external modems are usually fine, no matter what make or model.
Many USB external modems are winmodems and should be avoided. If you are interested in the status of USB support in Linux, please follow the link to the Linux-USB uusbd development page"

my modem is a dsl modem....