Problem with Nvidia Drivers / Open GL

[xveganx]

ok well here is goes.............
I just did a fresh install of Fedora Core 2.
I updated my yum.conf and ran yum update.
Then I rebooted into the new updated kernel 2.6.10-12-1fc2 I believe.
Exit X and ran the nvidia system installer.
Said it needed to compile for my new kernel so I did that.
It installed correctly no problem. It mentioned my rivafb module
but thats never been a problem before. Ive done this like 10 times before without any problems.
Now when I open an Open GL application (tux racer) I can hear the sound but the screen just stays blank.
what did I do wrong? here is my xorg.conf and my GLX output................
The nvidia splash screen comes up fine while booting.

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "record"
Load "freetype"
Load "type1"
Load "glx"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "E90f+-3"
DisplaySize 360 270
HorizSync 30.0 - 86.0
VertRefresh 50.0 - 180.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "Videocard vendor"
BoardName "NVIDIA GeForce FX (generic)"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection

[xveganx]

[root@localhost root]# glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.3
server glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control,
GLX_ARB_multisample, GLX_NV_float_buffer
client glx vendor string: NVIDIA Corporation
client glx version string: 1.3
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_visual_info,
GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_SGI_video_sync,
GLX_NV_swap_group, GLX_NV_video_out, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGI_swap_control, GLX_NV_float_buffer
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control,
GLX_ARB_multisample, GLX_NV_float_buffer, GLX_ARB_get_proc_address
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce FX 5700/AGP/SSE/3DNOW!
OpenGL version string: 1.5.2 NVIDIA 66.29
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_fragment_program,
GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader, GL_ARB_imaging,
GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_occlusion_query,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
GL_ARB_shader_objects, GL_ARB_shading_language_100,
GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_buffer_object,
GL_ARB_vertex_program, GL_ARB_vertex_shader, GL_ARB_window_pos,
GL_S3_s3tc, GL_EXT_texture_env_add, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_minmax,
GL_EXT_blend_subtract, GL_EXT_compiled_vertex_array, GL_EXT_Cg_shader,
GL_EXT_depth_bounds_test, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_paletted_texture,
GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
GL_EXT_shared_texture_palette, GL_EXT_stencil_two_side,
GL_EXT_stencil_wrap, GL_EXT_texture3D, GL_EXT_texture_compression_s3tc,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_vertex_array,
GL_HP_occlusion_test, GL_IBM_rasterpos_clip,
GL_IBM_texture_mirrored_repeat, GL_KTX_buffer_region, GL_NV_blend_square,
GL_NV_copy_depth_to_color, GL_NV_depth_clamp, GL_NV_fence,
GL_NV_float_buffer, GL_NV_fog_distance, GL_NV_fragment_program,
GL_NV_fragment_program_option, GL_NV_half_float, GL_NV_light_max_exponent,
GL_NV_multisample_filter_hint, GL_NV_occlusion_query,
GL_NV_packed_depth_stencil, GL_NV_pixel_data_range, GL_NV_point_sprite,
GL_NV_primitive_restart, GL_NV_register_combiners,
GL_NV_register_combiners2, GL_NV_texgen_reflection,
GL_NV_texture_compression_vtc, GL_NV_texture_env_combine4,
GL_NV_texture_expand_normal, GL_NV_texture_rectangle,
GL_NV_texture_shader, GL_NV_texture_shader2, GL_NV_texture_shader3,
GL_NV_vertex_array_range, GL_NV_vertex_array_range2, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_NV_vertex_program2,
GL_NV_vertex_program2_option, GL_SGIS_generate_mipmap,
GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
GL_SUN_slice_accum
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x21 24 tc 0 32 0 r y . 8 8 8 0 4 24 8 16 16 16 16 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 0 4 24 8 16 16 16 16 0 0 None
0x23 24 tc 0 32 0 r y . 8 8 8 8 4 24 8 16 16 16 16 0 0 None
0x24 24 tc 0 32 0 r . . 8 8 8 0 4 24 8 16 16 16 16 0 0 None
0x25 24 tc 0 32 0 r . . 8 8 8 8 4 24 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r y . 8 8 8 0 4 16 0 16 16 16 16 0 0 None
0x27 24 tc 0 32 0 r y . 8 8 8 8 4 16 0 16 16 16 16 0 0 None
0x28 24 tc 0 32 0 r . . 8 8 8 0 4 16 0 16 16 16 16 0 0 None
0x29 24 tc 0 32 0 r . . 8 8 8 8 4 16 0 16 16 16 16 0 0 None
0x2a 24 tc 0 32 0 r y . 8 8 8 0 4 0 0 16 16 16 16 0 0 None
0x2b 24 tc 0 32 0 r y . 8 8 8 8 4 0 0 16 16 16 16 0 0 None
0x2c 24 tc 0 32 0 r . . 8 8 8 0 4 0 0 16 16 16 16 0 0 None
0x2d 24 tc 0 32 0 r . . 8 8 8 8 4 0 0 16 16 16 16 0 0 None
0x2e 24 tc 0 32 0 r y . 8 8 8 0 4 24 8 16 16 16 16 2 1 Ncon
0x2f 24 tc 0 32 0 r y . 8 8 8 8 4 24 8 16 16 16 16 2 1 Ncon
0x30 24 tc 0 32 0 r y . 8 8 8 0 4 24 8 16 16 16 16 4 1 Ncon
0x31 24 tc 0 32 0 r y . 8 8 8 8 4 24 8 16 16 16 16 4 1 Ncon
0x32 24 tc 0 32 0 r y . 8 8 8 0 4 16 0 16 16 16 16 2 1 Ncon
0x33 24 tc 0 32 0 r y . 8 8 8 8 4 16 0 16 16 16 16 2 1 Ncon
0x34 24 tc 0 32 0 r y . 8 8 8 0 4 16 0 16 16 16 16 4 1 Ncon
0x35 24 tc 0 32 0 r y . 8 8 8 8 4 16 0 16 16 16 16 4 1 Ncon
0x36 24 dc 0 32 0 r y . 8 8 8 8 4 24 8 16 16 16 16 0 0 None
0x37 24 dc 0 32 0 r . . 8 8 8 0 4 24 8 16 16 16 16 0 0 None
0x38 24 dc 0 32 0 r . . 8 8 8 8 4 24 8 16 16 16 16 0 0 None
0x39 24 dc 0 32 0 r y . 8 8 8 0 4 16 0 16 16 16 16 0 0 None
0x3a 24 dc 0 32 0 r y . 8 8 8 8 4 16 0 16 16 16 16 0 0 None
0x3b 24 dc 0 32 0 r . . 8 8 8 0 4 16 0 16 16 16 16 0 0 None
0x3c 24 dc 0 32 0 r . . 8 8 8 8 4 16 0 16 16 16 16 0 0 None
0x3d 24 dc 0 32 0 r y . 8 8 8 0 4 0 0 16 16 16 16 0 0 None
0x3e 24 dc 0 32 0 r y . 8 8 8 8 4 0 0 16 16 16 16 0 0 None
0x3f 24 dc 0 32 0 r . . 8 8 8 0 4 0 0 16 16 16 16 0 0 None
0x40 24 dc 0 32 0 r . . 8 8 8 8 4 0 0 16 16 16 16 0 0 None
0x41 24 dc 0 32 0 r y . 8 8 8 0 4 24 8 16 16 16 16 2 1 Ncon
0x42 24 dc 0 32 0 r y . 8 8 8 8 4 24 8 16 16 16 16 2 1 Ncon
0x43 24 dc 0 32 0 r y . 8 8 8 0 4 24 8 16 16 16 16 4 1 Ncon
0x44 24 dc 0 32 0 r y . 8 8 8 8 4 24 8 16 16 16 16 4 1 Ncon
0x45 24 dc 0 32 0 r y . 8 8 8 0 4 16 0 16 16 16 16 2 1 Ncon
0x46 24 dc 0 32 0 r y . 8 8 8 8 4 16 0 16 16 16 16 2 1 Ncon
0x47 24 dc 0 32 0 r y . 8 8 8 0 4 16 0 16 16 16 16 4 1 Ncon
0x48 24 dc 0 32 0 r y . 8 8 8 8 4 16 0 16 16 16 16 4 1 Ncon
[root@localhost root]#

[tajidinabd]

try to run tux racer from the terminal and copy the error message here so we know what going on.
im no expert but i dont see a modeline in ur xorg also that maybe an issue also.

[xveganx]

[root@localhost root]# tuxracer
Tux Racer 0.61 -- a Sunspire Studios Production (http://www.sunspirestudios.com)
(c) 1999-2000 Jasmin F. Patry <jfpatry@sunspirestudios.com>
"Tux Racer" is a trademark of Jasmin F. Patry
Tux Racer comes with ABSOLUTELY NO WARRANTY. This is free software,
and you are welcome to redistribute it under certain conditions.
See http://www.gnu.org/copyleft/gpl.html for details.

Fatal signal: Segmentation Fault (SDL Parachute Deployed)
[root@localhost root]#

[tajidinabd]

have u thought to try to install tux racer from source instead. LIke i say in ur xorg dont u need a modeline if im correct. Dont know if that will solve the problem. someone correct me if im wrong

[xveganx]

have u thought to try to install tux racer from source instead. LIke i say in ur xorg dont u need a modeline if im correct. Dont know if that will solve the problem. someone correct me if im wrong


I dont know if its related but im also having problems with tv time now as well. I wasnt before.
After about 5 minutes it will freeze up. I can still hear the sound but the video stops.

Also ut2004demo freezes at the screen with the nvidia logo.

[xveganx]

anyone? help me!

[TeKKiE]

Section "DRI"
Group 0
Mode 0666
EndSection

One of the first things that I noticed, is your DRI section (module) that has not been commented out. Make sure you leave this commented out in your configs. I also am no expert, as far as video is concerned with Linux, however, I do also have an nVidia card, and the man pages do specify that this section should be commented out, or deleted altogether.

***EDIT*** Also, please let us know what version of drivers you are using.

[TeKKiE]

One more thing, run glxgears and give us example framerates. GLXGears is NOT accurate, but if you only get 20-30fps in the standard window, this would tell us that your AGP module is not loading correctly.

[xveganx]

thanx for the reply. I will run glx gears a little later.
Im using the latest drivers right of the nvidia website.
as far as commenting that "DRI" part out I thought I only had
to comment out Load "DRI" ????
Also maybe this will save me the time from running glx gears later.........
I ran the 3d box open gl screensaver and only got 30fps. I thought that was
really low.????

[tajidinabd]

here is a copy of my xorg use as a reference but just remember i am running at lower res than u and mine is that odd ball 1280x800 since its a laptop but ill post so u can get an idea.


# My X11 Org configuration File

Section "ServerLayout"
Identifier "Default Layout"
Screen "WXGA Screen"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Alps Touchpad"
EndSection

Section "Files"

# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "synaptics"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
# Load "dri"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "yes"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

# These parameters obtained from a mailing list post somewhere...
Section "InputDevice"
Identifier "Alps Touchpad"
Driver "synaptics"
Option "CorePointer"
Option "Device" "/dev/input/event1"
Option "Protocol" "event"
Option "LeftEdge" "60"
Option "RightEdge" "830"
Option "TopEdge" "70"
Option "BottomEdge" "650"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "110"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "50"
Option "HorizScrollDelta" "50"
Option "MinSpeed" "0.2"
Option "MaxSpeed" "0.5"
Option "AccelFactor" "0.01"
Option "EdgeMotionSpeed" "40"
Option "UpDownScrolling" "1"
Option "TouchpadOff" "0"
EndSection

# Doesn't work
# Section "InputDevice"
# Identifier "Mouse0"
# Driver "synaptics"
# Option "CorePointer"
# Option "Protocol" "event"
# Option "Device" "/dev/input/mice"
# Option "ZAxisMapping" "4 5"
# Option "Emulate3Buttons" "no"
#EndSection

# Original config
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

# Also allow USB mouse
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

# Added by GAG
# Reference: http://cmb.phys.cwru.edu/kisner/linux/compaq-r3000/XF86Config-4
Section "Modes"
# Here is the optimal mode: 1280x800 @ 60.0Hz
Identifier "16:10"
# 1280x800 @ 60.00Hz (GTF) hsyn: 49.68kHz; pclk: 83.46Mhz
ModeLine "1280x800" 83.5 1280 1344 1480 1680 800 801 804 828
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Unknown monitor"
UseModes "16:10"
HorizSync 30-90
VertRefresh 50-75
Option "UseEdidFreqs" "1"
Option "FlatPanelProperties" "Scaling = aspect-scaled"
Option "dpms"
EndSection

# Non-twinview setup
Section "Device"
Identifier "NVidia GeForce4 440 Go 64M"
Driver "nvidia"
Option "NvAgp" "3"
Option "UseEdidFreqs" "1"
Option "FlatPenelProperties" "Scaling = aspect-scaled"
Option "RenderAccel" "1"
Option "AllowGLXWithComposite" "true"
EndSection

# This monitor is only needed in the non-twinview setup
Section "Monitor"
Identifier "WXGA LCD"
UseModes "16:10"
HorizSync 30-90
VertRefresh 50-75
Option "UseEdidFreqs" "1"
Option "FlatPanelProperties" "Scaling = aspect-scaled"
Option "dpms"
EndSection

Section "Screen"
Identifier "WXGA Screen"
Device "NVidia GeForce4 440 Go 64M"
Monitor "WXGA LCD"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x800"
Virtual 1280 800
EndSubSection
EndSection

#Section "DRI"
# Group 0
# Mode 0666
#EndSection

Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection


pay attention to the device section where i have added those options. all this info is in the readme for the nvidia driver. i hope it helps u out and also still say u dont have a modeline in ur xorg. let me know if it makes sense to u