chiefy
2nd February 2005, 06:45 PM
Here's my story, I searched and couldn't find any help...
I have recently upgraded to FC3 (did fresh install) on my old Dell Dimension T700r, everything was working fine. I recently bought a KVM switch (Belkin USB) to switch between Fedora and my XP box. Anyhow, I got it this morning and plugged everything in and it didn't work. Specifically, the keyboard (the USB mouse worked fine). I unplugged the keyboard a few times and plugged it back in to the KVM.. and for some reason, I finally got it to work. Then, I rebooted and the keyboard works in GRUB but after the Kernel loads, it doesn't seem to work anymore (the numlock light goes off). The strange thing is that when I plug in my old PS/2 keyboard it is still recognizing the USB keyboard. Anyhow, here's my logs, I upgraded my BIOS to the latest version, no help....
Linux version 2.6.9-1.667 (bhcompile@tweety.build.redhat.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Tue Nov 2 14:41:25 EST 2004
ACPI: RSDP (v000 PTLTD ) @ 0x000f6bb0
ACPI: RSDT (v001 PTLTD RSDT 0x00000001 PTL 0x01000000) @ 0x040fdbcb
ACPI: FADT (v001 DELL KUBLAI 0x20001013 PTL 0x000f4240) @ 0x040ff78c
ACPI: DSDT (v001 Intel S2440BX 0x00000001 MSFT 0x01000004) @ 0x00000000
ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to enable ACPI
ACPI: Disabling ACPI support
Built 1 zonelists
Kernel command line: ro root=LABEL=/1 rhgb quiet
mapped 4G/4G trampoline to ffff4000.
Initializing CPU#0
CPU 0 irqstacks, hard=023d5000 soft=023d4000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 698.457 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 320456k/327680k available (2068k kernel code, 6632k reserved, 647k data, 144k init, 0k highmem)
Calibrating delay loop... 1380.35 BogoMIPS (lpj=690176)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Intel Pentium III (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 385k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd993, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1107351018.577:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 6ECDA687281A73E5
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Limiting direct PCI/PCI transfers.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 263M
agpgart: AGP aperture is 64M @ 0xf8000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1c20-0x1c27, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1c28-0x1c2f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: QUANTUM FIREBALLP LM30.0, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SAMSUNG DVD-ROM SD-608, ATAPI CD/DVD-ROM drive
hdd: SONY CD-RW CRX140E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 58633344 sectors (30020 MB) w/1900KiB Cache, CHS=58168/16/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda4 < hda5 >
hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
inserting floppy driver for 2.6.9-1.667
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.27
PCI: Found IRQ 3 for device 0000:00:11.0
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 at 0x1800, 00:40:05:87:87:51, IRQ 3
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
PCI: Found IRQ 9 for device 0000:00:10.0
PCI: Sharing IRQ 9 with 0000:00:07.2
Vortex: init.... <6>done.
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 9 for device 0000:00:07.2
PCI: Sharing IRQ 9 with 0000:00:10.0
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 9, io base 00001c00
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
usb 1-2: new full speed USB device using address 2
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
ip_tables: (C) 2000-2002 Netfilter core team
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
usb 1-2.1: new full speed USB device using address 3
hub 1-2.1:1.0: USB hub found
hub 1-2.1:1.0: 3 ports detected
usb 1-2.2: new low speed USB device using address 4
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:07.2-2.2
usb 1-2.3: new low speed USB device using address 5
input: USB HID v1.10 Keyboard [Justcom Technology USB KVM Switch] on usb-0000:00:07.2-2.3
NET: Registered protocol family 10
Disabled Privacy Extensions on device 02369a00(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
input: USB HID v1.10 Mouse [Justcom Technology USB KVM Switch] on usb-0000:00:07.2-2.3
usb 1-2.1.1: new full speed USB device using address 6
input: USB HID v1.00 Keyboard [HP Multimedia Keyboard Hub] on usb-0000:00:07.2-2.1.1
input,hiddev96: USB HID v1.00 Device [HP Multimedia Keyboard Hub] on usb-0000:00:07.2-2.1.1
drivers/usb/input/hid-input.c: event field not found
drivers/usb/input/hid-input.c: event field not found
drivers/usb/input/hid-input.c: event field not found
eth0: no IPv6 routers present
EXT3 FS on hda3, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 655160k swap on /dev/hda5. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
I have recently upgraded to FC3 (did fresh install) on my old Dell Dimension T700r, everything was working fine. I recently bought a KVM switch (Belkin USB) to switch between Fedora and my XP box. Anyhow, I got it this morning and plugged everything in and it didn't work. Specifically, the keyboard (the USB mouse worked fine). I unplugged the keyboard a few times and plugged it back in to the KVM.. and for some reason, I finally got it to work. Then, I rebooted and the keyboard works in GRUB but after the Kernel loads, it doesn't seem to work anymore (the numlock light goes off). The strange thing is that when I plug in my old PS/2 keyboard it is still recognizing the USB keyboard. Anyhow, here's my logs, I upgraded my BIOS to the latest version, no help....
Linux version 2.6.9-1.667 (bhcompile@tweety.build.redhat.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Tue Nov 2 14:41:25 EST 2004
ACPI: RSDP (v000 PTLTD ) @ 0x000f6bb0
ACPI: RSDT (v001 PTLTD RSDT 0x00000001 PTL 0x01000000) @ 0x040fdbcb
ACPI: FADT (v001 DELL KUBLAI 0x20001013 PTL 0x000f4240) @ 0x040ff78c
ACPI: DSDT (v001 Intel S2440BX 0x00000001 MSFT 0x01000004) @ 0x00000000
ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to enable ACPI
ACPI: Disabling ACPI support
Built 1 zonelists
Kernel command line: ro root=LABEL=/1 rhgb quiet
mapped 4G/4G trampoline to ffff4000.
Initializing CPU#0
CPU 0 irqstacks, hard=023d5000 soft=023d4000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 698.457 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 320456k/327680k available (2068k kernel code, 6632k reserved, 647k data, 144k init, 0k highmem)
Calibrating delay loop... 1380.35 BogoMIPS (lpj=690176)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Intel Pentium III (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 385k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd993, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1107351018.577:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 6ECDA687281A73E5
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Limiting direct PCI/PCI transfers.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: probe of vesafb0 failed with error -6
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 263M
agpgart: AGP aperture is 64M @ 0xf8000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1c20-0x1c27, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1c28-0x1c2f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: QUANTUM FIREBALLP LM30.0, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SAMSUNG DVD-ROM SD-608, ATAPI CD/DVD-ROM drive
hdd: SONY CD-RW CRX140E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 58633344 sectors (30020 MB) w/1900KiB Cache, CHS=58168/16/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda4 < hda5 >
hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
inserting floppy driver for 2.6.9-1.667
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.27
PCI: Found IRQ 3 for device 0000:00:11.0
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 at 0x1800, 00:40:05:87:87:51, IRQ 3
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
PCI: Found IRQ 9 for device 0000:00:10.0
PCI: Sharing IRQ 9 with 0000:00:07.2
Vortex: init.... <6>done.
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 9 for device 0000:00:07.2
PCI: Sharing IRQ 9 with 0000:00:10.0
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 9, io base 00001c00
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
usb 1-2: new full speed USB device using address 2
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
ip_tables: (C) 2000-2002 Netfilter core team
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
usb 1-2.1: new full speed USB device using address 3
hub 1-2.1:1.0: USB hub found
hub 1-2.1:1.0: 3 ports detected
usb 1-2.2: new low speed USB device using address 4
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:07.2-2.2
usb 1-2.3: new low speed USB device using address 5
input: USB HID v1.10 Keyboard [Justcom Technology USB KVM Switch] on usb-0000:00:07.2-2.3
NET: Registered protocol family 10
Disabled Privacy Extensions on device 02369a00(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
input: USB HID v1.10 Mouse [Justcom Technology USB KVM Switch] on usb-0000:00:07.2-2.3
usb 1-2.1.1: new full speed USB device using address 6
input: USB HID v1.00 Keyboard [HP Multimedia Keyboard Hub] on usb-0000:00:07.2-2.1.1
input,hiddev96: USB HID v1.00 Device [HP Multimedia Keyboard Hub] on usb-0000:00:07.2-2.1.1
drivers/usb/input/hid-input.c: event field not found
drivers/usb/input/hid-input.c: event field not found
drivers/usb/input/hid-input.c: event field not found
eth0: no IPv6 routers present
EXT3 FS on hda3, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 655160k swap on /dev/hda5. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
