dakuda
31st December 2004, 10:20 PM
The absolute farthest I have been able to get FC2 to load (kinda) is when the computer is going through the drives to find where to boot from.
It stops at:
Searching for boot record from Floppy..Not Found
Searching for boot record from CDROM..Not Found
Searching for boot record from SCSI..OK
At this point, the computer does nothing. Just sits there.
Here are pretty much all the stats I have on the machine, any help would be great.
Supermicro S2DGU motherboard -- Intel 440GX chipset
* Dual P3 Xeon 550/100/512 processors (mobo supports up to two 700 Mhz P3 Xeon processors!)
* 384MB memory (4 slots total/2 slots free)
* 2 EIDE, 1 Floppy, ECP/EPP Parallel, PS/2 Mouse, PS/2 Keyboard, 2 Serial, 1 Infrared, 2 USB 1.1 ports onboard
* Adaptec 7890 Ultra2 LVD SCSI port (up to 80MB/s transfer rate)
* Optional RAID III port, Adaptec ARO-1130C RAID card included!
* 1 AGP, 5 PCI (1 is the optional RAID III slot), 2 ISA slots
* Floppy drive
* Enlight 400W power supply
* IBM 48X IDE CD-ROM drive
* ATI Rage IIc AGP card
* IBM Etherjet 10/100 PCI network adapter
* 3 CRU Dataport VIII Removable SCSI enclosures containing:
o 1 Western Digital 9.1GB 10K Ultra2 LVD SCSI WD Enterprise drive
o 2 Quantum Atlas IV 3.5 Series 9.1GB 10K Ultra160 SCSI drives
It stops at:
Searching for boot record from Floppy..Not Found
Searching for boot record from CDROM..Not Found
Searching for boot record from SCSI..OK
At this point, the computer does nothing. Just sits there.
Here are pretty much all the stats I have on the machine, any help would be great.
Supermicro S2DGU motherboard -- Intel 440GX chipset
* Dual P3 Xeon 550/100/512 processors (mobo supports up to two 700 Mhz P3 Xeon processors!)
* 384MB memory (4 slots total/2 slots free)
* 2 EIDE, 1 Floppy, ECP/EPP Parallel, PS/2 Mouse, PS/2 Keyboard, 2 Serial, 1 Infrared, 2 USB 1.1 ports onboard
* Adaptec 7890 Ultra2 LVD SCSI port (up to 80MB/s transfer rate)
* Optional RAID III port, Adaptec ARO-1130C RAID card included!
* 1 AGP, 5 PCI (1 is the optional RAID III slot), 2 ISA slots
* Floppy drive
* Enlight 400W power supply
* IBM 48X IDE CD-ROM drive
* ATI Rage IIc AGP card
* IBM Etherjet 10/100 PCI network adapter
* 3 CRU Dataport VIII Removable SCSI enclosures containing:
o 1 Western Digital 9.1GB 10K Ultra2 LVD SCSI WD Enterprise drive
o 2 Quantum Atlas IV 3.5 Series 9.1GB 10K Ultra160 SCSI drives
