PDA

View Full Version : k3b problem


geotri314
20th March 2011, 12:00 PM
hi everyone. i use fedora 14 64x. i was always using k3b to burn my discs while running 32bit older fedoras. now i ve installed k3b and when i tried to burn a data disc, the procedure will be aborted, showing the following debugging output:

Devices
-----------------------
Optiarc DVD RW AD-7241S 1.03 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]

K3b::IsoImager
-----------------------
mkisofs print size result: 2255497 (4619257856 bytes)

System
-----------------------
K3b Version: 2.0.2
KDE Version: 4.5.5 (KDE 4.5.5)
QT Version: 4.7.1
Kernel: 2.6.35.11-83.fc14.x86_64

Used versions
-----------------------
mkisofs: 1.1.11
cdrecord: 1.1.11

cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'Optiarc '
Identification : 'DVD RW AD-7241S '
Revision : '1.03'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1802240 = 1760 KB
FIFO size : 4194304 = 4096 KB
Speed set to 22160 KB/s
Track 01: data 4405 MB
Total size: 5059 MB (501:13.29) = 2255497 sectors
Lout start: 5059 MB (501:15/22) = 2255497 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 42999
Starting to write CD/DVD at speed 17.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01: 0 of 4405 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 01 D1 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 03 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.464s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 952320 bytes
Writing time: 29.980s
Average write speed 111.0x.
Fixating...
Errno: 5 (Input/output error), flush cache scsi sendcmd: no error
CDB: 35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 03 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 200.478s timeout 200s
/usr/bin/wodim: Cannot fixate disk.
Trouble flushing the cache
Fixating time: 200.478s
/usr/bin/wodim: fifo had 79 puts and 16 gets.
/usr/bin/wodim: fifo was 0 times empty and 3 times full, min fill was 89%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=16 -sao driveropts=burnfree -data -tsize=2255497s -

mkisofs
-----------------------
2255497
I: -input-charset not specified, using utf-8 (detected in locale settings)
0.02% done, estimate finish Sun Mar 20 13:56:05 2011
0.04% done, estimate finish Sun Mar 20 13:20:10 2011
0.07% done, estimate finish Sun Mar 20 13:07:54 2011
0.09% done, estimate finish Sun Mar 20 13:01:43 2011
0.11% done, estimate finish Sun Mar 20 19:26:40 2011

mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid 201103201 -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-odorf/k3bG12499.tmp -rational-rock -hide-list /tmp/kde-odorf/k3bx12499.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-odorf/k3bw12499.tmp -no-cache-inodes -allow-limited-size -udf -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-odorf/k3bJ12499.tmp

mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid 201103201 -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-odorf/k3bC12499.tmp -rational-rock -hide-list /tmp/kde-odorf/k3bj12499.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-odorf/k3bO12499.tmp -no-cache-inodes -allow-limited-size -udf -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-odorf/k3bL12499.tmp

does anyone know what's wrong? thanks in advance

Keldorn
20th March 2011, 08:36 PM
It seem's to be a woodim bug... you can perform some searching on this line:
/usr/bin/wodim: Cannot fixate disk.
Try to decrease speed, i think it might help

murenti
26th April 2011, 05:29 AM
I also use Fedora 14 KDE 64 bit with K3b. K3b burns the data and verifies it as good but the disk is unreadable and does not show up as a mounted disk. I have checked all settings in the Users groups and manually selected for automount to occur but after burning 3 disks I now don't know what else to do.
Can anyone please help with regards to this issue.

geotri314
26th April 2011, 07:59 PM
well i ve changed on fedora 14 32 bits but still having problems with k3b. i ve even changed the burning speed but still getting this failure log:

Devices
-----------------------
HL-DT-ST DVDRAM GH22NS50 TN02 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]

K3b::IsoImager
-----------------------
mkisofs print size result: 2212875 (4531968000 bytes)

System
-----------------------
K3b Version: 2.0.2
KDE Version: 4.6.2 (4.6.2)
QT Version: 4.7.2
Kernel: 2.6.35.12-88.fc14.i686.PAE

Used versions
-----------------------
mkisofs: 1.1.11
cdrecord: 1.1.11

cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GH22NS50 '
Revision : 'TN02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1048576 = 1024 KB
Drive DMA Speed: 16756 kB/s 95x CD 12x DVD
FIFO size : 4194304 = 4096 KB
Speed set to 11080 KB/s
Track 01: data 4322 MB
Total size: 4963 MB (491:45.00) = 2212875 sectors
Lout start: 4963 MB (491:47/00) = 2212875 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 85621
Starting to write CD/DVD at speed 8.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01: 0 of 4322 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 03 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.472s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 0 bytes
Writing time: 35.772s
Average write speed 111.0x.
Fixating...
Fixating time: 22.878s
/usr/bin/wodim: fifo had 64 puts and 1 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=8 -sao driveropts=burnfree -data -tsize=2212875s -

mkisofs
-----------------------
2212875
I: -input-charset not specified, using utf-8 (detected in locale settings)
0.02% done, estimate finish Tue Apr 26 21:52:53 2011
0.05% done, estimate finish Tue Apr 26 21:52:53 2011
0.07% done, estimate finish Tue Apr 26 21:52:53 2011
0.09% done, estimate finish Tue Apr 26 21:52:53 2011

mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid 201104261 -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-odorf/k3bcl2409.tmp -rational-rock -hide-list /tmp/kde-odorf/k3bZW2409.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-odorf/k3blH2409.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-odorf/k3brw2409.tmp

mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid 201104261 -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-odorf/k3bjk2409.tmp -rational-rock -hide-list /tmp/kde-odorf/k3bVY2409.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-odorf/k3bRE2409.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-odorf/k3bMr2409.tmp


but that is not what i mind the most. the real irritating thing is that noone would even bother reading the thread. i say it's time to give ubuntu a chance. at least their community is still active.

mrlee
2nd May 2011, 02:28 PM
I also had same problem but found solution! Please read this post on how to resolve CD/DVD burning problems:
FC13 wodim -> cdrecord issues (http://www.fedoraforum.org/forum/showpost.php?p=1467240&postcount=5)

Good Luck!

Catanauan Photos - Machado - Gubkin Travel Photos