F10 Network Manager wont detect E160 modem

[swashplate]

Hi all

Bought an O2 Huawei E160 PAYG Broadband modem yesterday and it works fine in windows XP.

However, in F10, the Network manager won't pick it up. In terminal, LSUSB knows it's there however. But lsusb thinks its a E220/E270 modem.

Any ideas? Please see attached screenshot.

[swashplate]

This is the output from the dmesg:

usb 1-1: new high speed USB device using ehci_hcd and address 4
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: New USB device found, idVendor=12d1, idProduct=1003
usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=0
usb 1-1: Product: HUAWEI Mobile
usb 1-1: Manufacturer: HUAWEI Technology
Initializing USB Mass Storage driver...
usb 1-1: USB disconnect, address 4
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1: new high speed USB device using ehci_hcd and address 5
usb 1-1: configuration #1 chosen from 1 choice
usb-storage: probe of 1-1:1.0 failed with error -5
usb-storage: probe of 1-1:1.1 failed with error -5
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usb 1-1: New USB device found, idVendor=12d1, idProduct=1003
usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=0
usb 1-1: Product: HUAWEI Mobile
usb 1-1: Manufacturer: HUAWEI Technology
usbcore: registered new interface driver usbserial
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
usbserial: USB Serial support registered for GSM modem (1-port)
option 1-1:1.0: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
option 1-1:1.1: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
usbcore: registered new interface driver option
option: USB Driver for GSM modems: v0.7.2
usb-storage: device scan complete
scsi 5:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg1 type 5
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access HUAWEI MMC Storage 2.31 PQ: 0 ANSI: 2
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg2 type 0