Micronet ADSL modem not recognized..

[schindler]

Hi..
I have installed Fedora 7 and when I try to use my Micronet ADSL modem Router, it is not recognizing. Router manual does not contain anything about linux drivers. Please guide me on this issue. Im linux newbie.:confused:

Thanks!!

[r1348]

Why did you install Fedora 7, which is long after its end of life? Most recent version is Fedora 10, with Fedora 11 due out in less than 2 months.
Also, is that an usb modem? If so it might be just unsupported, or you might need external firmware.

[schindler]

Thanks for the reply..:) Yes it is USB + RJ45. Can u pls tel me how to get an external firmware?
Thks

[r1348]

So you're really convinced you want to use fedora 7? Ok...

So, first of all we need to determine which firmware you need, if any. Mind that your modem might just be unsupported.

Can you please post the results of lsusb and dmesg commands in a terminal? (do it with the modem connected to usb)

[schindler]

Not exactly, I am in a bit urgency to use a non windows os. So surely i will go for latest fedora versions. For the time being i need to configure my modem.

Following are the details.


[root@localhost ~]# lsusb

Bus 003 Device 001: ID 0000:0000

Bus 002 Device 003: ID 12a7:3160

Bus 002 Device 001: ID 0000:0000

Bus 005 Device 003: ID 064e:a100 Suyin Corp.

Bus 005 Device 001: ID 0000:0000

Bus 004 Device 001: ID 0000:0000

Bus 001 Device 001: ID 0000:0000


=============================================

[root@localhost ~]# dmesg

..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1376 bytes
Time: 10:00:10 Date: 03/05/109
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd6c2, last bus=12
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0b) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
pnp: 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved
Time: tsc clocksource has been installed.
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: 34000000-340fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: 34100000-341fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bus 11, cardbus bridge: 0000:0a:09.0
IO window: 00003000-000030ff
IO window: 00003400-000034ff
PREFETCH window: 30000000-33ffffff
MEM window: 38000000-3bffffff
PCI: Bridge: 0000:00:1e.0
IO window: 3000-3fff
MEM window: d0200000-d02fffff
PREFETCH window: 30000000-33ffffff
PCI: Enabling device 0000:00:1c.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Enabling device 0000:00:1c.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:0a:09.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 20 (level, low) -> IRQ 19
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Switched to high resolution mode on CPU 0
Freeing initrd memory: 3475k freed
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1238925610.169:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 65F8109C338BBD41
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI: Thermal Zone [THRM] (58 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xc0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Yenta: CardBus bridge found at 0000:0a:09.0 [1025:0110]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:0a:09.0, mfunc 0x01321b22, devctl 0x66
Time: hpet clocksource has been installed.
Yenta: ISA IRQ mask 0x0cf8, PCI irq 19
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
cs: IO port probe 0x3000-0x3fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Magic number: 5:382:21
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 240k freed
Write protecting the kernel read-only data: 820k
Clocksource tsc unstable (delta = -337641799 ns)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
cont...

[schindler]

ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001840
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd0644000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
SCSI subsystem initialized
libata version 2.20 loaded.
ata_piix 0000:00:1f.2: version 2.10ac1
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
input: SynPS/2 Synaptics TouchPad as /class/input/input1
input: AT Translated Set 2 keyboard as /class/input/input2
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15
scsi0 : ata_piix
ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC70P, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
ata1.00: configured for UDMA/100
scsi1 : ata_piix
usb 5-7: new high speed USB device using ehci_hcd and address 3
usb 5-7: configuration #1 chosen from 1 choice
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>usb 2-2: new full speed USB device using uhci_hcd and address 3
sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
scsi 1:0:0:0: CD-ROM MAT****A DVD-RAM UJ-850S 1.61 PQ: 0 ANSI: 5
usb 2-2: configuration #1 chosen from 1 choice
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(1238925618.612:2): enforcing=1 old_enforcing=0 auid=4294967295
security: 3 users, 6 roles, 1816 types, 78 bools, 1 sens, 1024 cats
security: 60 classes, 65638 rules

[schindler]

SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1238925619.112:3): policy loaded auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
PCI: Enabling device 0000:02:00.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.14 addr 0x34000000 irq 16 Yukon-FE (0xb7) rev 1
sky2 eth0: addr 00:1b:24:4c:c4:f9
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 21
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
intel_rng: FWH not detected
input: PC Speaker as /class/input/input3
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
usbcore: registered new interface driver cdc_ether
si3054: cannot initialize. EXT MID = 0000
ACPI: PCI Interrupt 0000:0a:09.2[A] -> GSI 20 (level, low) -> IRQ 19
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
ssb: Switching to ChipCommon core, index 0
ssb: Switching to PCI-E core, index 3
ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
bcm43xx_mac80211: Broadcom 4311 WLAN found
ssb: Switching to IEEE 802.11 core, index 1
bcm43xx_mac80211: Found PHY: Analog 4, Type 2, Revision 8
bcm43xx_mac80211: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
bcm43xx_mac80211: Radio turned off
wmaster0: Selected rate control algorithm 'simple'
eth1: register 'rndis_host' at usb-0000:00:1d.1-2, RNDIS device, 00:11:3b:10:b3:0e
usbcore: registered new interface driver rndis_host
audit(1238925625.864:4): avc: denied { search } for pid=1140 comm="salsa" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925625.864:5): avc: denied { search } for pid=1124 comm="salsa" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925625.864:6): avc: denied { search } for pid=1131 comm="salsa" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925625.864:7): avc: denied { search } for pid=1132 comm="salsa" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925625.864:8): avc: denied { search } for pid=1130 comm="salsa" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925625.864:9): avc: denied { search } for pid=1129 comm="salsa" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925625.864:10): avc: denied { search } for pid=1140 comm="alsactl" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925625.864:11): avc: denied { search } for pid=1124 comm="alsactl" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925625.864:12): avc: denied { search } for pid=1130 comm="alsactl" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925625.864:13): avc: denied { search } for pid=1131 comm="alsactl" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925625.864:14): avc: denied { search } for pid=1129 comm="alsactl" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925625.864:15): avc: denied { search } for pid=1132 comm="alsactl" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
loop: loaded (max 8 devices)
floppy0: no floppy controllers found
lp: driver loaded but no devices found
sonypi: Sony Programmable I/O Controller Driver v1.26.
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
BUG: warning at kernel/softirq.c:138/local_bh_enable() (Not tainted)

[schindler]

[<c042b0cf>] local_bh_enable+0x45/0x92
[<c06002bd>] cond_resched_softirq+0x2c/0x42
[<c059adf3>] release_sock+0x4f/0x9d
[<c05c670d>] tcp_sendmsg+0x90b/0x9f9
[<c05dec95>] inet_sendmsg+0x3b/0x45
[<c0598731>] sock_aio_write+0xf6/0x102
[<c04753ea>] do_sync_readv_writev+0xc1/0xfe
[<c0436e71>] autoremove_wake_function+0x0/0x35
[<c0475b33>] do_readv_writev+0xbc/0x187
[<c059863b>] sock_aio_write+0x0/0x102
[<c0475c3b>] vfs_writev+0x3d/0x48
[<c04760a4>] sys_writev+0x41/0x95
[<c0404f70>] syscall_call+0x7/0xb
=======================

audit(1238925637.862:16): avc: denied { search } for pid=1262 comm="rhgb" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925637.862:17): avc: denied { search } for pid=1262 comm="rhgb" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925637.862:18): avc: denied { search } for pid=1262 comm="rhgb" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925637.862:19): avc: denied { search } for pid=1262 comm="rhgb" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925638.362:20): avc: denied { search } for pid=1262 comm="rhgb" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925638.362:21): avc: denied { search } for pid=1262 comm="rhgb" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925638.362:22): avc: denied { search } for pid=1262 comm="rhgb" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925638.362:23): avc: denied { search } for pid=1262 comm="rhgb" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925638.362:24): avc: denied { search } for pid=1262 comm="rhgb" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925638.362:25): avc: denied { search } for pid=1262 comm="rhgb" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925638.362:26): avc: denied { search } for pid=1262 comm="rhgb" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925638.362:27): avc: denied { search } for pid=1262 comm="rhgb" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1238925639.362:28): avc: denied { search } for pid=1262 comm="rhgb" name="root" dev=dm-0 ino=10027009 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: ACPI Dock Station Driver
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input5
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input6
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input7
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: ec object not found
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 1015800k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1015800k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (4020 buckets, 32160 max)
sky2 eth0: enabling interface
sky2 eth0: ram buffer 4K
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: disabling interface
audit(1238925653.360:29): audit_pid=1947 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized i915 1.6.0 20060119 on minor 0
[root@localhost ~]#

[trigpoint]

You say is has usb and rj45?
Then forget the usb and use the rj45 connection, it should then all just work.

[schindler]

Thanks guys... Its working with RJ45 :)