clintonw
2008-12-17, 10:46 PM CST
My blackberry 8130 has an extra SD flash card installed which shows up as a normal USB flash drive when plugged into a computer. I can't get it work under FC10 + updates with the latest 2.6.27.5-117.fc10.i686 kernel version. I have tried on both my FC10 linux machines (desktop and Dell Latitude D620) with the same problem. The blackberry works fine as a flash drive under Windows XP and Vista so I'm stumped.
dmesg output:
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 4-1: New USB device found, idVendor=0fca, idProduct=0006
usb 4-1: New USB device strings: Mfr=1, Product=4, SerialNumber=3
usb 4-1: Product: RIM Mass Storage Device
usb 4-1: Manufacturer: Research In Motion
usb 4-1: SerialNumber: 38D597D70D946834674656E557FF5596897882D0
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access RIM BlackBerry SD 0001 PQ: 0 ANSI: 4 CCS
sd 4:0:0:0: [sdc] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdc] 3970048 512-byte hardware sectors (2033 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 53
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] 3970048 512-byte hardware sectors (2033 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 53
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 4:0:0:0: [sdc] Sense Key : No Sense [current]
sd 4:0:0:0: [sdc] Add. Sense: No additional sense information
sd 4:0:0:0: [sdc] Sense Key : No Sense [current]
sd 4:0:0:0: [sdc] Add. Sense: No additional sense information
sd 4:0:0:0: [sdc] Sense Key : No Sense [current]
repeated over and over again until the usb cable is unplugged.
sd 4:0:0:0: [sdc] Add. Sense: No additional sense information
sd 4:0:0:0: [sdc] Sense Key : No Sense [current]
dmesg output:
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 4-1: New USB device found, idVendor=0fca, idProduct=0006
usb 4-1: New USB device strings: Mfr=1, Product=4, SerialNumber=3
usb 4-1: Product: RIM Mass Storage Device
usb 4-1: Manufacturer: Research In Motion
usb 4-1: SerialNumber: 38D597D70D946834674656E557FF5596897882D0
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access RIM BlackBerry SD 0001 PQ: 0 ANSI: 4 CCS
sd 4:0:0:0: [sdc] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdc] 3970048 512-byte hardware sectors (2033 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 53
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] 3970048 512-byte hardware sectors (2033 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 53
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 4:0:0:0: [sdc] Sense Key : No Sense [current]
sd 4:0:0:0: [sdc] Add. Sense: No additional sense information
sd 4:0:0:0: [sdc] Sense Key : No Sense [current]
sd 4:0:0:0: [sdc] Add. Sense: No additional sense information
sd 4:0:0:0: [sdc] Sense Key : No Sense [current]
repeated over and over again until the usb cable is unplugged.
sd 4:0:0:0: [sdc] Add. Sense: No additional sense information
sd 4:0:0:0: [sdc] Sense Key : No Sense [current]