A CDROM problem

[d.unicorn]

guys, please help me ... after installing Fedora on my machine, my CD-R/DVD-R drive was not detected as part of the system hardware. What do you think i can do? :eek:

[JohnVV]

???????
what happens when you put a dvd ( data disk or movie -- ie. The Terminator) or even the install dvd

for a data dvd, like the install dvd, you should get a icon for it on your desktop .

[d.unicorn]

pls what i mean is, the CDROM was not even detected at all, even if i put any disk, i can read it. nothing like CDROM drive as part of my hardware list. So, can i have my CDROM drive back .... with Fedora on my machine. I don't want to remove Fedora .... !!!!!!!!!!!! HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!

[JohnVV]

do you have two drives one a dvd and the , the not seen, one is a cd/dvd drive

even if i put any disk, i can read it
so you CAN read a cd put into the drive ??? -- if so then it is working.
what is listed in the folder , on your desktop, called "computer"

in the services
System / Administration / services
is the "haldaemon " running ?
is there a error message in the system logs
/var/log/dmesag
/var/log/messages

[d.unicorn]

wow, it was a mistake from me .... the CDROM drive can't read any disk ... it's not even listed in my computer folder. how will i get it there? it not part of my hardware list .... but what's surprising me is that it was the same drive dat i used in installing it ...

[d.unicorn]

this is part of what i have in my /var/log/messages, take a look at it ...

Oct 28 07:53:28 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 19
[B]Oct 28 07:53:28 localhost kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Oct 28 07:53:28 localhost kernel: scsi0 : ata_piix
Oct 28 07:53:28 localhost kernel: scsi1 : ata_piix
Oct 28 07:53:28 localhost kernel: ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
Oct 28 07:53:28 localhost kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
Oct 28 07:53:28 localhost kernel: ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC7KP, max UDMA/100
Oct 28 07:53:28 localhost kernel: ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
Oct 28 07:53:28 localhost kernel: ata1.00: configured for UDMA/100
Oct 28 07:53:28 localhost kernel: scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5
Oct 28 07:53:28 localhost kernel: sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Oct 28 07:53:28 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 28 07:53:28 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 28 07:53:28 localhost kernel: sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Oct 28 07:53:28 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 28 07:53:28 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 28 07:53:28 localhost kernel: sda: sda1 sda2 sda3 sda4 < sda5 >
Oct 28 07:53:28 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Oct 28 07:53:28 localhost kernel: kjournald starting. Commit interval 5 seconds
Oct 28 07:53:28 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 28 07:53:28 localhost kernel: type=1404 audit(1225176702.357:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
Oct 28 07:53:28 localhost kernel: SELinux: policy loaded with handle_unknown=allow
Oct 28 07:53:28 localhost kernel: type=1403 audit(1225176703.046:3): policy loaded auid=4294967295 ses=4294967295
Oct 28 07:53:28 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 28 07:53:28 localhost kernel: input: PC Speaker as /devices/platform/pcspkr/input/input4
Oct 28 07:53:28 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
Oct 28 07:53:28 localhost kernel: iTCO_vendor_support: vendor-support=0
Oct 28 07:53:28 localhost kernel: [drm] Initialized drm 1.1.0 20060810
Oct 28 07:53:28 localhost kernel: input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
Oct 28 07:53:28 localhost kernel: ACPI: Power Button (FF) [PWRF]
Oct 28 07:53:28 localhost kernel: input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
Oct 28 07:53:28 localhost kernel: ACPI: Lid Switch [LID0]
Oct 28 07:53:28 localhost kernel: input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7
Oct 28 07:53:28 localhost kernel: ACPI: Power Button (CM) [PWRB]
Oct 28 07:53:28 localhost kernel: input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input8
Oct 28 07:53:28 localhost kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
Oct 28 07:53:28 localhost kernel: iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
Oct 28 07:53:28 localhost kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Oct 28 07:53:28 localhost kernel: ACPI: Sleep Button (CM) [SLPB]
Oct 28 07:53:28 localhost kernel: ACPI: AC Adapter [AC0] (on-line)
Oct 28 07:53:28 localhost kernel: intel_rng: FWH not detected
Oct 28 07:53:28 localhost kernel: ricoh-mmc: Ricoh MMC Controller disabling driver
Oct 28 07:53:28 localhost kernel: ricoh-mmc: Copyright(c) Philip Langdale
Oct 28 07:53:28 localhost kernel: ricoh-mmc: Ricoh MMC controller found at 0000:02:00.3 [1180:0843] (rev 0)
Oct 28 07:53:28 localhost kernel: ricoh-mmc: Controller is now disabled.
Oct 28 07:53:28 localhost kernel: r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
Oct 28 07:53:28 localhost kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 20 (level, low) -> IRQ 20
Oct 28 07:53:28 localhost kernel: eth0: RTL8169sc/8110sc at 0xe020c800, 00:e0:4c:73:0b:70, XID 18000000 IRQ 20
Oct 28 07:53:28 localhost kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
Oct 28 07:53:28 localhost kernel: [drm] Initialized i915 1.12.0 20071122 on minor 0
Oct 28 07:53:28 localhost kernel: ACPI: Battery Slot [BAT0] (battery present)
Oct 28 07:53:28 localhost kernel: ACPI: WMI: Mapper loaded
Oct 28 07:53:28 localhost kernel: sdhci: Secure Digital Host Controller Interface driver
Oct 28 07:53:28 localhost kernel: sdhci: Copyright(c) Pierre Ossman
Oct 28 07:53:28 localhost kernel: sdhci: SDHCI controller found at 0000:02:00.2 [1180:0822] (rev 18)
Oct 28 07:53:28 localhost kernel: ACPI: PCI Interrupt 0000:02:00.2[C] -> GSI 23 (level, low) -> IRQ 23
Oct 28 07:53:28 localhost kernel: sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
Oct 28 07:53:28 localhost kernel: mmc0: SDHCI at 0xd0000800 irq 23 DMA
Oct 28 07:53:28 localhost kernel: ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 22 (level, low) -> IRQ 22
Oct 28 07:53:28 localhost kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input9
Oct 28 07:53:28 localhost kernel: ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Oct 28 07:53:28 localhost kernel: firewire_ohci: Added fw-ohci device 0000:02:00.1, OHCI version 1.10
Oct 28 07:53:28 localhost kernel: cs: IO port probe 0x100-0x3af: clean.
Oct 28 07:53:28 localhost kernel: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
Oct 28 07:53:28 localhost kernel: cs: IO port probe 0x820-0x8ff: clean.
Oct 28 07:53:28 localhost kernel: cs: IO port probe 0xc00-0xcf7: clean.
Oct 28 07:53:28 localhost kernel: cs: IO port probe 0xa00-0xaff: clean.
Oct 28 07:53:28 localhost kernel: firewire_core: created device fw0: GUID 00007400e04c730b, S400
Oct 28 07:53:28 localhost kernel: Registered led device: rt73usb-phy0:radio
Oct 28 07:53:28 localhost kernel: Registered led device: rt73usb-phy0:assoc
Oct 28 07:53:28 localhost kernel: Registered led device: rt73usb-phy0:quality
Oct 28 07:53:28 localhost kernel: usbcore: registered new interface driver rt73usb
Oct 28 07:53:28 localhost kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
Oct 28 07:53:28 localhost kernel: ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
Oct 28 07:53:28 localhost kernel: ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x3
Oct 28 07:53:28 localhost kernel: hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...