datastorm
25th October 2008, 09:44 PM
hello there,
i have a dell vostro 1000 with the following hardware:
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200]
05:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
08:01.0 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
08:01.1 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
everything runs fine with the following kernel:
Linux lucymobile.mshome.net 2.6.27-0.352.rc7.git1.fc10.x86_64 #1 SMP Tue Sep 23 21:13:29 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux
and with "nomodeset"
The problem is when i try to modprobe the ndiswrapper, it says the kernel has a oops.
There is a update for ndiswrapper but this requires a kernel update:
[root@lucymobile oli]# yum update
Geladene Plugins: refresh-packagekit
Einrichten des Aktualisierungsprozess
Löse Abhängigkeiten auf
--> Führe Transaktionsprüfung aus
---> Paket kmod-ndiswrapper.x86_64 0:1.53-5.fc10.2 gesetzt, um aktualisiert zu werden
--> Verarbeite Abhängigkeiten: kmod-ndiswrapper-2.6.27.3-27.rc1.fc10.x86_64 = 1.53-5.fc10.2 für Paket: kmod-ndiswrapper
--> Führe Transaktionsprüfung aus
---> Paket kmod-ndiswrapper-2.6.27.3-27.rc1.fc10.x86_64.x86_64 0:1.53-5.fc10.2 gesetzt, um aktualisiert zu werden
--> Verarbeite Abhängigkeiten: kernel-uname-r = 2.6.27.3-27.rc1.fc10.x86_64 für Paket: kmod-ndiswrapper-2.6.27.3-27.rc1.fc10.x86_64
--> Abhängigkeitsauflösung beendet
kmod-ndiswrapper-2.6.27.3-27.rc1.fc10.x86_64-1.53-5.fc10.2.x86_64 von rpmfusion-free-rawhide hat Abhängigkeitsauflöse-Probleme
--> Fehlende Abhängigkeit: kernel-uname-r = 2.6.27.3-27.rc1.fc10.x86_64 wird benötigt von Paket kmod-ndiswrapper-2.6.27.3-27.rc1.fc10.x86_64-1.53-5.fc10.2.x86_64 (rpmfusion-free-rawhide)
Fehler: Fehlende Abhängigkeit: kernel-uname-r = 2.6.27.3-27.rc1.fc10.x86_64 wird benötigt von Paket kmod-ndiswrapper-2.6.27.3-27.rc1.fc10.x86_64-1.53-5.fc10.2.x86_64 (rpmfusion-free-rawhide)
When i start the 2.6.27-3-27 kernel, the system freezes after runlevel 3 so it looks like its a Xorg problem. The logfile doesnt show any error, it just stops writing - i can post this log if u need it for further information.
hope someone can help me
i have a dell vostro 1000 with the following hardware:
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200]
05:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
08:01.0 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
08:01.1 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
everything runs fine with the following kernel:
Linux lucymobile.mshome.net 2.6.27-0.352.rc7.git1.fc10.x86_64 #1 SMP Tue Sep 23 21:13:29 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux
and with "nomodeset"
The problem is when i try to modprobe the ndiswrapper, it says the kernel has a oops.
There is a update for ndiswrapper but this requires a kernel update:
[root@lucymobile oli]# yum update
Geladene Plugins: refresh-packagekit
Einrichten des Aktualisierungsprozess
Löse Abhängigkeiten auf
--> Führe Transaktionsprüfung aus
---> Paket kmod-ndiswrapper.x86_64 0:1.53-5.fc10.2 gesetzt, um aktualisiert zu werden
--> Verarbeite Abhängigkeiten: kmod-ndiswrapper-2.6.27.3-27.rc1.fc10.x86_64 = 1.53-5.fc10.2 für Paket: kmod-ndiswrapper
--> Führe Transaktionsprüfung aus
---> Paket kmod-ndiswrapper-2.6.27.3-27.rc1.fc10.x86_64.x86_64 0:1.53-5.fc10.2 gesetzt, um aktualisiert zu werden
--> Verarbeite Abhängigkeiten: kernel-uname-r = 2.6.27.3-27.rc1.fc10.x86_64 für Paket: kmod-ndiswrapper-2.6.27.3-27.rc1.fc10.x86_64
--> Abhängigkeitsauflösung beendet
kmod-ndiswrapper-2.6.27.3-27.rc1.fc10.x86_64-1.53-5.fc10.2.x86_64 von rpmfusion-free-rawhide hat Abhängigkeitsauflöse-Probleme
--> Fehlende Abhängigkeit: kernel-uname-r = 2.6.27.3-27.rc1.fc10.x86_64 wird benötigt von Paket kmod-ndiswrapper-2.6.27.3-27.rc1.fc10.x86_64-1.53-5.fc10.2.x86_64 (rpmfusion-free-rawhide)
Fehler: Fehlende Abhängigkeit: kernel-uname-r = 2.6.27.3-27.rc1.fc10.x86_64 wird benötigt von Paket kmod-ndiswrapper-2.6.27.3-27.rc1.fc10.x86_64-1.53-5.fc10.2.x86_64 (rpmfusion-free-rawhide)
When i start the 2.6.27-3-27 kernel, the system freezes after runlevel 3 so it looks like its a Xorg problem. The logfile doesnt show any error, it just stops writing - i can post this log if u need it for further information.
hope someone can help me
