Palm z22 on F9

[REnich]

Hello,

I've been trying to sync my palm z22 using j-pilot and gnome-pilot.

I've been around and seen some HowTo's. All of them assume that the device is visible not under /dev/pilot but /dev/ttyUSB0 or /dev/ttyUSB1

I don't see either of those; not tty nor pilot ones. I don't know what's happening or how to make it visible. Can anybody help me?

I'm sure that the cable works since it charges the z22... that's all.

[nyjetshead]

It only becomes visible when you when you hot sync
/sbin/lsusb (when you have it in hot sync)

To test that pilot-link is working;
pilot-xfer -p usb: -l (then press hotsync)

[REnich]

[root@introdesk ~]# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical Wheel Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

that's what I get...

[nyjetshead]

Did you select hotsys first then /sbin/lsusb? If not you wont get anything.

[REnich]

yes I did hit hotsync and then /sbin/lsusb...

This means no connection?

[nyjetshead]

I assume that you can hotsync with windows?
I have a different device but it should work the same.
Check the palm preferences to see if your set to Lan cradle/Cable

[brebs]

Turn on udev debugging.
udevcontrol log_priority=debug
Then press the hotsync button on the palm, and look at the messages in /var/log/messages

[REnich]

nothing... I think my z22 might be broken...