Can't mount Lacie d2 2Tb drive in F7

[holland6]

I have 3 2Tb Lacie d2 Extreme external hard drives. Two of them are empty and I can mount them with either USB or Firewire. The third one is about 99% full of data. It's formatted in ext2 format. I was connected to a machine running Red Hat Enterprise 4. When I connected it to my Dell Dimension 4300S running F7 using USB, nothing happens except that the blue light blinks rapidly. I checked dmesg and this is what I find:

usb 1-1: new full speed USB device using uhci_hcd and address 9
usb 1-1: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb 1-1: reset full speed USB device using uhci_hcd and address 9
usb 1-1: device descriptor read/64, error -110
usb 1-1: device descriptor read/64, error -110
usb 1-1: reset full speed USB device using uhci_hcd and address 9
...[repeat]...
scsi 4:0:0:0: scsi: Device offlined - not ready after error recovery
...[repeat above with new address number]...

I've done a lot of searching on this problem with no luck so far. I've tried about 3 different cables with no changes and have tried all of the USB ports on my Dell. Just in case it helps I'll include the output of lsusb and lspci:

%lsusb
Bus 001 Device 002: ID 04fc:0013 Sunplus Technology Co., Ltd
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000

[The first one is my mouse.]

%lspci
00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset Host Bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset AGP Bridge (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 12)
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 12)
00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 Controller (rev 12)
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 12)
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus Controller (rev 12)
00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 12)
00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio Controller (rev 12)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 Pro Ultra TF
02:07.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 31)
02:08.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 04)

I appreciate any help.
Thanks!