Wine problem

[Chen]

Hi,

Hope someone can help. I try to install starcraft with wine. Error as below ?

[admin@Admin STARCRAFT]$ wine install.exe
libGL warning: 3D driver claims to not support visual 0x4b
libGL warning: 3D driver claims to not support visual 0x4b
err:ntdll:RtlpWaitForCriticalSection section 0x6073f340 "x11drv_main.c: X11DRV_CritSection" wait timed out in thread 000f, blocked by 000e, retrying (60 sec)
fixme:bitblt:X11DRV_ClientSideDIBCopy potential optimization: client-side color-index mode DIB copy
fixme:bitblt:X11DRV_ClientSideDIBCopy potential optimization: client-side color-index mode DIB copy

Anyone has the solution?

TQ

[beer_hunter]

seems that compatibility with OpenGL is not the best.. what version of wine do you have? also do you have all opengl libraries installed?

[Chen]

I updated the latest wine from fc6 extra repo.
for openGL libraries, i only know fireGL. Where and how to install 'all' libraries?

Thanks.

[KClaisse]

Chen, do you by any chance use an Intel motherboard/video card?

[Chen]

I am using ATI Radeon 9200 and AMD Athon 1700+. I am not using intel motherboard/graphic card at this moment.

[leigh123linux]

Hi , did you disable composite in xorg.conf, What graphic card driver do you use and does it support your model graphics card. And if you are using XGL , this may cause issues?
see link and check.?

http://ati.de/support/driver.html

also did you install all of wine

su -
yum install wine*

I did not answer post before because there was not enough detail to workout any possible solution. (if you list OS type and hardware it helps )

leigh

[Chen]

ok.
[root@Admin ~]# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: ATI Technologies Inc M9+ 5C63 [Radeon Mobility 9200 (AGP)] (rev 01)
01:00.1 Display controller: ATI Technologies Inc Unknown device 5c43 (rev 01)

[root@Admin ~]# uname -r
2.6.18-1.2849.fc6

Is this enough?

[leigh123linux]

what ati driver do you use. does it support your ati card , does it support 3d graphics

or post result of

glxinfo

[Chen]

Glxinfo here. I dont undersstand it :

[root@Admin ~]# glsinfo
-bash: glsinfo: command not found
[root@Admin ~]# glxinfo'
>
[root@Admin ~]# glxinfo
name of display: :0.0
libGL warning: 3D driver claims to not support visual 0x4b
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig
OpenGL vendor string: Tungsten Graphics, Inc.
OpenGL renderer string: Mesa DRI R200 20060602 AGP 1x x86/MMX+/3DNow!+/SSE TCL
OpenGL version string: 1.3 Mesa 6.5.1
OpenGL extensions:
GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture,
GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_rectangle, GL_ARB_transpose_matrix,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_window_pos,
GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_compiled_vertex_array, GL_EXT_convolution, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_histogram,
GL_EXT_packed_pixels, GL_EXT_polygon_offset, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_stencil_wrap, GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod_bias,
GL_EXT_texture_mirror_clamp, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
GL_ATI_texture_mirror_once, GL_ATI_fragment_shader, GL_IBM_rasterpos_clip,
GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate,
GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_MESA_window_pos,
GL_NV_blend_square, GL_NV_light_max_exponent, GL_NV_texture_rectangle,
GL_NV_texgen_reflection, GL_OES_read_format, GL_SGI_color_matrix,
GL_SGI_color_table, GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod

visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x24 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x26 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x27 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x28 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x29 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x2a 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x2b 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x2c 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x2d 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x2e 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x2f 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x30 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 0 0 None
0x31 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x32 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 0 0 Slow
0x4b 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 Ncon
[root@Admin ~]#

[leigh123linux]

ok you have 3d acceleration on graphics, can you post this file to me so I can check and fix any errors.
The file is call xorg.conf and you can send it as attachment.

/etc/X11/xorg.conf

X11 has a capital X

[Chen]

Thanks. You are so helpful.
My xorg.conf :

# Xorg configuration created by system-config-display

Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "Monitor"
Identifier "Monitor0"
ModelName "Monitor 1280x1024"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 31.5 - 79.0
VertRefresh 50.0 - 90.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "radeon"
Option "AddARGBGLXVisuals" "True"
Option "DisableGLXRootClipping" "True"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection

[Chen]

Oh, attachment is here.

[leigh123linux]

ok had a look and made some changes , backup old xorg.conf by renaming xorg.conf.old and replace with this one. try it , if it does not work post the result of

glxinfo


leigh

dont forgot to restart X

[Chen]

ok. i will try on sunday and will inform you the result.

[mdulzo]

Did you notice both your attempt to install starcraft and your glxinfo command both outputted the same error message?

[root@Admin ~]# glxinfo
name of display: :0.0
libGL warning: 3D driver claims to not support visual 0x4b


and


[admin@Admin STARCRAFT]$ wine install.exe
libGL warning: 3D driver claims to not support visual 0x4b


It looks like your problem may lie in your driver. Any chance your driver isn't up to date? You might need to update it or to install a new one from livna or from the manufacturer.

[Chen]

to mdulzo : i use kmod-fglrx 8.31.5-1.2.6.18_1.2849.fc6 from livna, i believe this is the latest one. i still remember i can see wine when i used fc4 and fc5.

[Chen]

to leigh123 : X window cannot start. The xorg.conf is not correct.

[leigh123linux]

to leigh123 : X window cannot start. The xorg.conf is not correct.

sorry , from your original xorg.conf I notice that you have the wrong video driver "radeon"
on last post you state that you use the livna driver the correct entry for this is "fglrx"

Have you check to see if you have the right kernel for this driver you need i686 , if you have the i586 kernel you will need to reinstall the livna driver.

to check kernel use this howto

http://forum.fedoraforum.org/showthread.php?t=139751

also check here to see if this driver version even supports your graphics card as the latest livna driver will not support your card.

http://ati.de/support/driver.html

[Chen]

1) i try to replace "fglrx"-fail and uninstall fglrx drive and replace back "radeon"- also fail.

2)Regards to the .586 and .686 problem. I met this probelm when i first installed fc6. I am alert of this. I install my new kernal, flgrx driver manually with smart-PM

[leigh123linux]

to mdulzo : i use kmod-fglrx 8.31.5-1.2.6.18_1.2849.fc6 from livna, i believe this is the latest one. i still remember i can see wine when i used fc4 and fc5.

This driver doesn't support your card , check ati support.

[Chen]

I read a post b4 (i cannot find it back) not to install a tarball driver from nvidia or ati coz it will mess up the os. Ati drive will write "ati" instead of "radeon" and if anything goes wrong, it is unrecoverable or something like that. He suggested us to install drivers in rpm version so that it can be uninstall if anything not right. I will only try that with my spare pc then.

[leigh123linux]

If you use this option with the ati installer it makes four rpm's that can be removed with add & remove software. they are the equal of the livna driver.

su
sh ati-8.28.run --buildpkg Fedora/FC6

you might get error . and need to do this

http://www.phoronix.com/redblog/?p=blog&i=NTUwMA

[Chen]

Ok. i exclude
Section "Files"
ModulePath "/usr/X11R6/lib/modules"
FontPath "unix/:7100"
EndSection

X started. Beryl can be launched and the 3D effect is damn nice! glxgear show 1000fps but shows libGL warning: 3D driver claims to not support visual 0x4b. Wine cannot be seen but can hear the sound.

When either one of the
Option "AccelMethod" "XAA"
Option "AGPFastWrite" "1"
Option "EnablePageFlip" "1"
Option "ColorTiling" "1"
disable. "libGL warning: 3D driver claims to not support visual 0x4b" not shown but glxgears only give 180fps. Berly forced to logout. Wine cannot be seen but can hear sound.

[leigh123linux]

Have you tried setting wine window display size so it smaller than desktop display size

[Chen]

leigh123, you are right, driver from ati works, i try with my notebook-mobility radeon X1600 which is not support by livna driver. Thanks.

Where is wine configuration located? i cant find it.

[leigh123linux]

Its in the menu under system tools, or from terminal

winecfg