xorg x11

[Wolpiro]

I have tried to install this package: xorg-x11-drv-fglrx-8.24.8-3.lvn5.src.rpm.
I've found it on http://rpm.pbone.net/ and it is for Fedora Core 5, but it gives this error:

# rpm -ivh xorg-x11-drv-fglrx-8.24.8-3.lvn5.src.rpm
1:xorg-x11-drv-fglrx warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
########################################### [100%]
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
I don't known what it means... Somebody can help me?

[LocutusOfBorg]

It's a source rpms file - that is, it contains the original source code of the program, the patches and the specfile. You have to rebuild it if you want to use it.
The error syou see are nothing to be concerned about: rpm doesn't find on your system the original user/group which owns the files, so it defaults to root. It's ok.

[Wolpiro]

This is my xorg.conf file:

# Xorg configuration created by system-config-display

Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Synaptics" "CorePointer"
InputDevice "Mouse0" "AlwaysCore"
EndSection

Section "Files"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "synaptics"
Load "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection

Section "InputDevice"
Identifier "Synaptics"
Driver "synaptics"
Option "Device" "/dev/input/mice"
Option "Protocol" "auto-dev"
Option "Emulate3Buttons" "yes"
EndSection

Section "Monitor"

### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "HP 1024 LCD Flat Panel 14-inch Display"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 32.0 - 61.0
VertRefresh 50.0 - 90.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "radeon"
VendorName "Videocard vendor"
BoardName "ATI Technologies Inc Radeon Mobility U1"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection

[Wolpiro]

I can't use 3d Acc. and Tv-Out. Thanx for help.

[LocutusOfBorg]

weird...
Your xorg seems to be OK: given the fact that the ATI proprietary driver doesn't support your chip but xorg does, you should have 3D enabled with the radeon driver.
What gives
fglrxinfo | grep -i " direct rendering"
?

[Wolpiro]

weird...
Your xorg seems to be OK: given the fact that the ATI proprietary driver doesn't support your chip but xorg does, you should have 3D enabled with the radeon driver.
What gives
fglrxinfo | grep -i " direct rendering"
?
It does... nothing!

[root@host38-63 ~]# fglrxinfo | grep -i " direct rendering"
[root@host38-63 ~]#

[Wolpiro]

For me isn't important the 3d acc. I don't use games, but I need the TV-Out...